Description
Rifle Scope Product Details
Zenit PK-06 Red Dot, Weaver
This is one of the best Belarus small open collimator “red dot” combat optics from BelOMO manufacturer using “heads-up display” (HUD) technology to superimpose a reticle pattern onto a filtered lens to provide precision CQB target acquisition. This system presents an unobstructed field of view, in 1x power which allows for extremely comfortable, “both eyes open” shooting. On average, most users will see a 50% gain in target acquisition times and a 50% smaller shot group at 100 meters versus iron sights. It is designed for engaging fast moving targets and targets appearing for a short period of time in close quarters and urban combat situations in various light conditions. It provides clear targeting from 104 lx to 10-2 lx (daylight, twilight and moonlight), one- or two-eye targeting, is very effective when shooting from moving vehicles, and allows for perfect kill shots on fast-moving, small and spontaneously appearing targets. PK-06 offers a similar if heavier build-style to the SGC Quatro with an open, L-shaped frame with the lens at the front. And also offers similar features. First and most important is a choice of three aiming marks – single dot, half cross and half cross with dot on top. All these can be selected by the simple push of a button, as opposed to having a dial them in. Another option is selection of automatic or manual brightness control. There’s even a tool that allows you to re-zero the turrets if you run out of adjustment. It is a tough, well-built Red Dot with superior features at a fraction of the cost of other similar scopes.It’s lightweight, shockproof, waterproof, has a sealed body, and is for use in severe conditions.
Rifle Scope Product Features
Using “heads-up display” (HUD) technology to superimpose a reticle pattern onto a filtered lens to provide precision CQB target acquisition.
This system presents an unobstructed field of view, in 1x power which allows for extremely comfortable, “both eyes open” shooting.
It is designed for engaging fast moving targets and targets appearing for a short period of time in close quarters and urban combat situations in various light conditions.very effective when shooting from moving vehicles, and allows for perfect kill shots on fast-moving, small and spontaneously appearing targets.
choice of three aiming marks – single dot, half cross and half cross with dot on top. All these can be selected by the simple push of a button
Selection of automatic or manual brightness control.Lightweight, shockproof, waterproof, has a sealed body, and is for use in severe conditions.
About the Kalinka Optics Brand
Kalinka Optics is a premium supplier for rifle scopes, optics, mounts, and other components used for firearms like rifles and long guns. They innovate and build their mounts and related products by using materials which are long lasting and resilient. This includes the Zenit PK-06 Red Dot, Weaver by Kalinka Optics. For additional shooting items, visit their site.
What You Need to Know About Glass
Rifle scopes enable you to precisely aim a rifle at different targets by lining up your eye with the target over a distance. They do this through zoom by utilizing a set of lenses inside the scope. The scope’s positioning can be adapted to take into account many ecological aspects like wind and elevation increases to make up for bullet drop.
The scope’s purpose is to help shooters understand precisely where the bullet will hit based upon the sight picture you are seeing with the scope as you line up the scope’s crosshair or reticle with the intended point of impact. Most contemporary rifle scopes have about eleven parts which are found inside and on the exterior of the scope. These scope parts include the rifle scope’s body, lenses, modification turrets or dials, focus rings, and other parts. See all eleven parts of an optic.
Rifle Glass Types
Rifle scopes can be either “first focal plane” or “second focal plane” kind of scopes. The kind of focal plane a scope has establishes where the reticle or crosshair lies in relation to the scopes magnification. It simply implies the reticle is situated behind or in front of the magnification lens of the scope. Choosing the most desired style of rifle glass is based upon what sort of hunting or shooting you plan on undertaking.
First Focal Plane Optics
First focal plane glass (FFP) include the reticle ahead of the magnifying lens. This induces the reticle to increase in size based upon the level of magnification being used. The result is that the reticle measurements are the same at the amplified range as they are at the non amplified range. One tick on a mil-dot reticle at one hundred yards with no “zoom” is still the exact same tick at one hundred yards by using 5x “zoom”. These types of scopes are useful for:
- Quick acquisition, long distance types of shooting
- Shooting situations where calculations are low
- Experienced shooters who understand their target “hold over” and also “lead” ratios for their rifles
- Shooters who don’t mind the reticle is enlarged and takes up more visual eyesight room than a SFP reticle
Second Focal Plane Glass Facts
Second focal plane optics (SFP) feature the reticle behind the zoom lens. This causes the reticle to remain at the exact same scale in connection with the amount of zoom being used. The final result is that the reticle dimensions change based on the magnification chosen to shoot over lengthier ranges due to the fact that the markings present distinct increments which fluctuate with the zoom. In the FFP example with the SFP optic, the 5x “zoom” 100 yard tick measurement would be 1/5th of the non “zoom” tick. These sorts of optics work for:
- Long distance types of shooting where shooters have increased time to make ballistic computations
- Shooting where most shots happen within shorter distances and ranges
- Shooters who like a clearer optic sight picture with less space taken up by the bigger FFP reticle
Details on Glass Zoom
The amount of zoom a scope provides is determined by the size, thickness, and curvatures of the lenses inside of the rifle scope. The magnification of the scope is the “power” of the scope.
About Fixed Single Power Lens Optics
A single power rifle scope and optic uses a zoom number designator like 4×32. This suggests the zoom power of the scope is 4x power while the objective lens is 32mm. The zoom of this kind of optic can not fluctuate since it is a fixed power optic.
About Adjustable Power Lens Scopes
Variable power rifle scopes can be adjusted between magnification increments. These types of scopes will list the zoom degree in a configuration like 2-10×32. These numbers mean the zoom of the scope can be set between 2x and 10x power. This also includes the powers in-between 2 and 10. The power shift is achieved by working with the power ring component of the scope near the rear of the scope by the eye bell piece.
Power and Range Correlations
Here are some advised scope power levels and the distances where they may be efficiently used. High power glass will not be as useful as lower magnification level glass considering that too much zoom can be a negative aspect depending on your shooting distance. The exact same idea applies to extended ranges where the shooter needs enough power to see exactly where to properly aim the rifle at the target.
Details on Rifle Glass Lens Coverings
All contemporary rifle optic lenses are coated. There are different types and qualities of lens coatings. When shopping for high end rifle optical setups, Lens finishing can be an important component of defining the capability of the rifle. The glass lenses are one of the most essential components of the glass considering that they are what your eye looks through while sighting a rifle in on the point of impact. The covering on the lenses shields the lens surface as well as improves anti glare capabilities from excess natural light and color profiles.
HD Versus ED Lens Coatings
Some rifle glass companies will also use “HD” or high-definition glass coatings that apply various procedures, rare earth compounds, elements, and polarizations to enhance a wide range of color ranges and viewable definition through lenses. This high-definition covering is commonly used with higher density glass which reduces light’s ability to refract through the lens glass. Some scope manufacturers use “HD” to describe “ED” suggesting extra-low dispersion glass. ED handles how certain colors are presented on the chromatic spectrum and the chromatic aberration or deviance which is also called color distortion or fringing. Chromatic aberration can be noticeable over things with hard edges and shapes as light hits the item from certain angles.
Single Finishing Versus Multi-Coating
Different optic lenses can also have different finishings applied to them. All lenses usually have at least some type of treatment or coating applied to them prior to being used in a rifle scope or optic. This is due to the fact that the lens isn’t just a raw piece of glass. It is part of the finely tuned optic. It must have a finishing applied to it so that it will be efficiently usable in numerous types of environments, degrees of light (full VS shade), and other shooting conditions.
Single layered lenses have a treatment applied to them which is usually a protective and enhancing multi-purpose treatment. This lens treatment can preserve the lens from scratches while minimizing glare and other less beneficial things experienced in the shooting environment while sighting in with the optic. The quality of a single layered lens depends upon the scope maker and how much money you spent paying for it. Both the manufacturer and amount are indicators of the lens quality.
Some scope makers also make it a point to specify if their optic lenses are layered or “multi” coated. Being “much better” depends on the manufacturer’s lens treatment innovation and the quality of materials used in developing the rifle scope.
What to Know About Hydrophobic Finish
Water on a lens doesn’t help with keeping a clear sight picture through a scope at all. Many top of the line and military grade optic companies will coat their lenses with a hydrophilic or hydrophobic covering.
Alternatives for Installing Scopes on Firearms
Mounting options for scopes are available in a few choices. There are the basic scope rings which are individually mounted to the scope and one-piece scope mounts which cradle the scope. These different kinds of mounts also normally can be found in quick release variations which use manual levers which enable rifle shooters to rapidly install and dismount the scope.
Rifle Optic Mounting Solutions with Hex Key Rings
Standard, clamp style mounting scope rings use hex head screws to mount to the flattop design Picatinny scope installation rails on rifles. These types of scope mounts use two separate rings to support the optic, and are often made from 7075 T6 billet aluminum which is developed for long range accuracy shooting. This type of scope mount is great for rifles which need a resilient, rock solid mount which will not move no matter how much the scope is moved or abused.
Quick-Release Cantilever Glass Ring Mounting Solutions
These types of quick-release rifle scope mounts can be used to quickly remove a scope and attach it to a different rifle. Several scopes can even be switched out if they all use a compatible design mount. These types of mounts are handy for long guns which are carried a lot, to remove the optic from the rifle for protecting the scope, or for scopes which are used in between several rifles or are situationally focused.
Scope Tube Sealing and Gas Purging
Wetness inside your rifle scope can destroy a day of shooting and your pricey optic by triggering fogging and developing residue inside of the scope tube. A lot of scopes prevent moisture from entering the scope tube with a system of sealing O-rings which are waterproof.
Info Around Rifle Glass Tube Gas Purging
Another component of preventing the accumulation of moisture inside of the rifle optic’s tube is filling the tube with a gas like nitrogen. Given that this area is currently occupied by the gas, the optic is less impacted by temp shifts and pressure distinctions from the external environment which could possibly enable water vapor to leak in around the seals to fill the vacuum which would otherwise be there. These are good qualities of a decent rifle scope to look for.
