Description
Rifle Scope Product Details
Schmidt Bender PMII 5-25×56 L/P MTC LT Gen 2XR FFP 34mm .1mrad CW
Schmidt Bender PMII 5-25×56 L/P MTC LT Gen 2XR FFP 34mm .1mrad CW
Rifle Scope Product Features
About the Schmidt & Bender Scope Maker
Schmidt & Bender is a premium maker for rifle scopes, optics, mounting solutions, and other accessories used for guns like rifles and long guns. They style and supply their products making the most of building materials which are durable and long lasting. This includes the Schmidt Bender PMII 5-25×56 L/P MTC LT Gen 2XR FFP 34mm .1mrad CW by Schmidt & Bender. For additional shooting products, visit their website.
Scope Details
Rifle scopes enable you to specifically aim a rifle at various targets by aligning your eye with the target at range. They do this through magnifying the target using a set of lenses within the scope. The scope’s positioning can be adapted for consideration of numerous ecological factors like wind speed and elevation increases or decreases to account for bullet drop.
The scope’s function is to understand exactly where the bullet will land based on the sight picture you are seeing using the optic as you line up the scope’s crosshair or reticle with the target. A lot of contemporary rifle scopes have around 11 parts which are arranged within and outside of the optic. These optic pieces include the rifle scope’s body, lenses, windage turrets, focus rings, and other components. See all eleven parts of a rifle scope.
About Rifle Glass Varieties
Rifle scopes can be either “first focal plane” or “second focal plane” type of scopes. Opting for the finest type of rifle glass is based around what type of shooting you plan on doing.
Info About First Focal Plane Glass
Focal plane scopes (FFP) come with the reticle in front of the magnifying lens. This triggers the reticle to increase in size based upon the level of zoom being used. The benefit is that the reticle measurements are the same at the magnified distance as they are at the non magnified range. As an example, one tick on a mil-dot reticle at one hundred yards without any “zoom” is still the corresponding tick at one hundred yards with 5x “zoom”. These kinds of scopes are practical for:
- Quick acquisition, long distance kinds of shooting
- Shooting scenarios where calculations are small
- Experienced shooters who have an idea for their aim point “hold over” as well as “lead” equations for their rifles
- Shooters who don’t mind the reticle is enlarged and occupies more visual sight space than a SFP reticle
Second Focal Plane Scope Facts
Second focal plane scopes (SFP) come with the reticle to the rear of the magnification lens. In the FFP example with the SFP scope, the 5x “zoom” one hundred yard tick measurement would be 1/5th of the non “zoom” tick.
- Long distance types of shooting where shooters have more time to make ballistic calculations
- Shooting where most shots occur within much shorter proximities and ranges
- Shooters who select a clearer optic sight picture without space used up by the enlarged FFP reticle
Details on Rifle Optic Zoom
The measure of scope zoom you require is based on the style of shooting you would like to do. Nearly every kind of rifle glass delivers some degree of magnification. The quantity of zoom a scope gives is identified by the size, density, and curves of the lens glass within the rifle scope. The zoom of the scope is the “power” of the opic. This indicates what the shooter is checking out through the scope is magnified times the power factor of what can normally be seen by human eyes.
Info on Fixed Single Power Lens Rifle Scopes
A single power rifle optic will have a magnification number designator like 4×32. This suggests the magnification power of the scope is 4x power and the objective lens is 32mm. The zoom of this type of scope can not change since it is fixed.
Adjustable Power Lens Rifle Scope Info
Variable power rifle scopes use enhanced power. The power change is performed using the power ring part of the scope near the rear of the scope by the eye bell.
Rifle Scope Power and Range Correlation
Here are some advised scope powers and the ranges where they can be successfully used. Highly magnified glass will not be as useful as lower magnification level scopes because too much magnification can be a bad thing. The exact same concept relates to longer distances where the shooter needs to have increased power to see precisely where to properly aim the rifle at the target.
Lens Finishing for Scopes
All modern rifle optic and scope lenses are covered in special coatings. There are different types and qualities of lens coverings. When researching luxury rifle optical systems, Lens coating can be an essential component of defining the rifle’s capability. The lenses are one of the most essential parts of the scope because they are what your eye looks through while sighting a rifle in on the point of impact. The finish on the lenses offers protection to the lens exterior and assists with anti glare from excess natural light and color profiles.
HD Versus ED Lens Coatings
Some scope makers also use “HD” or high-definition lens finishings which use different methods, polarizations, chemicals, and components to draw out a wide range of colors and viewable definition through the lens. Some scope makers use “HD” to refer to “ED” indicating extra-low dispersion glass.
Single Finishing Versus Multi-Coating
Various optic lenses can even have different coatings applied to them. All lenses typically have at least some type of treatment or finishing applied to them before they are used in a rifle scope or optic assembly. This is due to the fact that the lens isn’t simply a raw piece of glass. It becomes part of the finely tuned optic. It must have a covering placed on it so that the lens will be optimally functional in numerous types of environments, degrees of sunshine (full light VS shaded), and other shooting conditions.
This lens treatment can protect the lens from scratches while decreasing glare and other less helpful things experienced in the shooting environment while sighting in with the scope. The quality of a single coated lens depends on the scope maker and how much you paid for it.
Some scope manufacturers similarly make it a point to specify if their optic lenses are layered or “multi” covered. Being “much better” depends on the producer’s lens treatment technology and the quality of materials used in developing the rifle scope.
Info on Hydrophobic Finishing
Water on a scope lens doesn’t assist with preserving a clear sight picture through a scope in any way. Lots of top of the line or high-end scope makers will coat their lenses with a hydrophilic or hydrophobic finishing. The Steiner Optics Nano-Protection is a fine example of this type of treatment. It treats the exterior of the Steiner scope lens so the water molecules can not bind to it or develop surface tension. The outcome is that the water beads roll off of the scope to preserve a clear, water free sight picture.
Alternatives for Installing Optics on Long Guns
Mounting approaches for scopes can be found in a few options. There are the standard scope rings which are individually mounted to the scope and one-piece mounts which cradle the scope. These various types of mounts also generally are made in quick release versions which use throw levers which enable rifle operators to rapidly install and dismount the glass.
Hex Key Rifle Optic Rings
Basic, clamp design mounting optic rings use hex head screws to position to the flattop style Picatinny scope mount rails on the tops of rifles. These varieties of scope mounts use two individual rings to support the scope, and are normally constructed from 7075 T6 billet aluminum which are created for far away accuracy shooting. This type of scope mount is excellent for rifles which need to have a durable, rock solid mount which will not shift regardless of just how much the scope is moved or abuse the rifle takes. These are the design of mounts you really want to have for a dedicated optics system on a reach out and touch someone scouting or tournament firearm that will rarely need to be changed or recalibrated. Blue 242 Loctite threadlocker can additionally be used on the scope mount’s screws to keep the hex screw threads from wiggling out after they are mounted safely in place. An example of these rings are the 30mm type from Vortex Optics. The set usually costs around $200 USD
Quick-Release Cantilever Rifle Scope Rings
These types of quick-release rifle scope mounts can be used to rapidly connect and take off a scope from a rifle before reattaching it to a different rifle. Numerous scopes can also be swapped out if they all use a compatible design mount. These types of mounts are handy for rifles which are transported a lot, to remove the optic from the rifle for protecting the scope, or for scopes which are used in between several rifles or are situationally focused.
Details on Glass Tube Sealing and Gas Purging
Wetness inside your rifle optic can destroy a day of shooting and your costly optic by inducing fogging and generating residue within the scope tube. Many scopes protect against humidity from going into the optical tube with a series of sealing O-rings which are waterproof. Normally, these water-resistant scopes can be submerged under 20 or 30 feet of water before the water pressure can push moisture past the O-rings. This should be plenty of moisture avoidance for common use rifles, unless you plan on taking your rifle on your motorboat and are concerned about the optic still functioning if it is submerged in water and you can still find the gun.
Gas Purged Glass Tubes
Another element of preventing the accumulation of moisture inside of the rifle optic’s tube is filling the tube with a gas like nitrogen. Because this space is already taken up by the gas, the scope is less affected by temperature level changes and pressure distinctions from the outdoor environment which may potentially enable water vapor to seep in around the seals to fill the void which would otherwise be there. These are good qualities of a good rifle scope to seek out.
