Description
Rifle Scope Product Details
SVBONY SV169 Rifle Scope, 3-9x32AO, Hunting Scope, Mil Dot Reticle, Spring Loaded Instant Zero Resets Turrets, Fits 20mm Picatinny Rails
Rifle Scope Product Features
SV169 rifle scope with 3-9x magnification and 32mm objective lens; Pair of Ring Mounts and Sunshade included;1/4 MOA Elevation and Windage Adjustments; Support your needs in different scenarios
Spring loaded instant zero reset turrets; Avoid touching the adjusting screw during the prey to prevent the ballistic deviation
Sunshade included;Block some light to avoid lens damage; Resist viewing errors caused by strong light exposure; prevent specular reflection of light and exposure of targets
Robust Design; Made of high quality aluminum alloy and constructed with the ultra strong one-piece tube; SV169 rifle scope is durable
Ample eye relief gets you on target quickly and easily;Super strength 25.4mm aluminum tube is used;Pair of Ring Mounts is included;1/4 MOA Elevation and Windage Adjustments;Mil-Dot reticle
3x -9x Magnification and 32mm Objective Lens
Moderate magnification from 3 times to 9 times; 32mm objective lens diameter pulls in more light and ensures bright clear image without increase weight.
1/4 MOA per Click Windage/Elevation Adjustment
Most Consistent and Precise 1/4 MOA per Click Windage/Elevation Adjustment. Lockable spring loaded instant zero reset turrets; avoid touching the finger adjustable screw during the prey to prevent the ballistic deviation.
Adjustable Windage Elevation
The Turrets for windage and elevation are smooth and click into place nicely and are marked so that it’s easier to sight in the scope at different yardages
Eyepiece diopter adjustment
It can be rotated to adjust the diopter, suitable for people with different eyesight. It’s more comfortable to watch, and you can see a wider range
Parallax adjustment
Adjustable target for 10 yards to infinity – perfect for close up. Nearest Focusing Distance is 10 YDS. You can precise targets by adjusting the objective
Reticle mil dot
SV169 Rifle Scope’s multiple layers of anti-reflective compounds on every glass surface provide bright, vivid pictures and optimum light transmission
IPX6 Waterproof
For people who often like to go out to hunt, waterproof performance is a key factor that should be considered. IPX6 waterproof rating can be used in almost all kinds of harsh environments
11PCS Green Coated Lenses
SV169 Rifle Scope’s multiple layers of anti-reflective compounds on every glass surface provide bright, vivid pictures and optimum light transmission
Specification:
Magnification: 3x – 9x
Exit Pupil Dia: 10.6-3.5mm
Field Of View (Angle): 6.8°-2.5° Degree
Field Of View (Linear): 42.1′–11.5′ ft@100YDS
Windage Elevation (Up Down): 40MOA ~ 40 MOA
Windage Elevation (Right Left) 40MOA ~ 40 MOA
Resolution Center (Axis) 9.81″
Nearest Focusing Distance: 10YDS
Ring Mounts: Fits Weaver and Picatinny Rails
Rails: 20mm
Type of Resets Turrets: Spring Loaded Instant Zero
Tube Diameter: 25.4MM
Type of Reticle: Mil Dot
Fogproof: 20 -50 Degree
Click Value 1 Click: 1/4MOA
Shock Proof: 800g@1000 cycles
About the SVBONY Company
SVBONY is a premium maker for long gun scopes, optics, mounts, and other components used for guns like rifles and long guns. They create and make their mounts, scopes, and related products by choosing building materials which are long lasting and durable. This includes the SVBONY SV169 Rifle Scope, 3-9x32AO, Hunting Scope, Mil Dot Reticle, Spring Loaded Instant Zero Resets Turrets, Fits 20mm Picatinny Rails by SVBONY. For additional shooting goods, visit their site.
Glass Details
Rifle scopes enable you to precisely align a rifle at various targets by lining up your eye with the target over a range. They do this through zoom by using a set of lenses inside the scope. The scope’s positioning can be dialed in to account for varied natural elements like wind and elevation increases to make up for bullet drop.
The scope’s purpose is to help the shooter understand exactly where the bullet will land based upon the sight picture you are viewing using the scope as you align the scope’s crosshair or reticle with the intended target. The majority of modern rifle optics have around eleven parts which are arranged inside and on the exterior of the scope. These parts consist of the rifle scope’s body, lenses, windage and elevation dials, objective focus rings, and other parts. Learn about the eleven parts of glass.
The Varieties of Rifle Scopes
Rifle scopes can be either “first focal plane” or “second focal plane” type of optics. Deciding on the finest type of rifle scope is based around what type of shooting you plan to do.
First Focal Plane Scopes
Focal plane scopes (FFP) come with the reticle in front of the magnifying lens. This triggers the reticle to increase in size based upon the extent of magnification being used. The result is that the reticle measurements are the same at the magnified range as they are at the non magnified range. As an example, one tick on a mil-dot reticle at 100 yards without “zoom” is still the same tick at one hundred yards with 5x “zoom”. These kinds of scopes work for:
- Quick acquisition, far away kinds of shooting
- Shooting circumstances where computations are very little
- Experienced shooters who know their aim point “hold over” as well as “lead” ratios for their firearm
- Shooters who don’t mind the reticle is enlarged and takes up more visual sight room than a SFP reticle
Second Focal Plane Optic Info
Second focal plane scopes (SFP) come with the reticle to the rear of the magnification lens. In the FFP example with the SFP scope, the 5x “zoom” 100 yard tick reticle measurement would be 1/5th of the non “zoom” tick measurement.
- Far away styles of shooting where shooters have increased time to make ballistic computations
- Shooting where most shots take place within much shorter ranges and spaces
- Shooters who prefer a clearer optic sight picture without room used up by the bigger FFP reticle
Glass Zoom
The quantity of magnification a scope offers is figured out by the diameter, density, and curvatures of the lenses inside of the rifle scope. The zoom of the scope is the “power” of the scope.
Fixed Single Power Lens Rifle Scope Details
A single power rifle scope comes with a zoom number designator like 4×32. This means the magnification power of the scope is 4x power and the objective lens is 32mm. The magnification of this type of optic can not fluctuate since it is fixed.
Adjustable Power Lens Optics
Variable power rifle scopes can be tweaked between magnified levels. The power change is performed using the power ring part of the scope near the back of the scope by the eye bell.
Rifle Optic Power and Range Correlation
Here are some suggested scope power levels and the distances where they could be effectively used. High power glass will not be as effective as lower magnification level scopes because too much magnification can be a negative aspect depending on your shooting distance. The same concept goes for extended ranges where the shooter needs enough power to see where to properly aim the rifle at the target.
About Glass Lens Coverings
All contemporary rifle scope and optic lenses are covered in special coatings. There are different types and qualities of lens coatings. When researching high end rifle scope systems, Lens finishing can be a significant aspect of a rifle. The lenses are among the most crucial parts of the optic considering that they are what your eye looks through while sighting a rifle in on the target. The covering on the lenses offers protection to the lens exterior and improves anti glare capabilities from refracted light and color perception.
HD Versus ED Lenses
Some scope producers also use “HD” or high-definition lens coverings which use various techniques, aspects, chemicals, and polarizations to draw out a wide range of colors and viewable quality through the lens. Some scope producers use “HD” to refer to “ED” to signify the lens has extra-low dispersion glass.
Single Glass Lens Finishing Versus Multi-Coating
Various scope lenses can even have various coverings applied to them. All lenses typically have at least some kind of treatment or finish applied to them prior to being used in a rifle scope or optic assembly. Because the lens isn’t just a raw piece of glass, they require performance enhancing coatings. It becomes part of the carefully tuned optic. It requires a coating to be applied to it so that it will be efficiently functional in many types of environments, degrees of sunlight (full light VS shade), and other shooting conditions.
Single coated lenses have a treatment applied to them which is usually a protective and boosting multi-purpose treatment. This lens treatment can safeguard the lens from scratches while lowering glare and other less helpful things experienced in the shooting environment while sighting in with the scope. The quality of a single coated lens depends upon the scope developer and how much money you spent on it. The scope’s maker and cost are signs of the lens quality.
Some scope manufacturers also make it a point to specify if their optic lenses are coated or “multi” covered. Being “much better” depends on the maker’s lens treatment technology and the quality of products used in constructing the rifle scope.
Hydrophobic Covering for Rifle Glass
Water on a lens doesn’t assist with keeping a clear sight picture through a scope at all. Numerous top of the line and high-end optic companies will coat their lenses with a hydrophilic or hydrophobic finishing.
Optic Mounting Options
Installing solutions for scopes can be found in a couple of options. There are the standard scope rings which are individually mounted to the scope and one-piece mounts which cradle the scope. These different types of mounts also normally can be found in quick release versions which use throw levers which permit rifle operators to quickly install and remove the glass.
Hex Key Rifle Optic Rings
Normal, clamp design mounting scope rings use hex head screws to mount to the flattop style Picatinny scope installation rails on rifles. These types of scope mounts use a couple of separate rings to support the optic, and are often made from 7075 T6 billet aluminum which are developed for long distance precision shooting. This type of scope mount is fine for rifles which require a durable, sound mount which will not move no matter how much the scope is moved or abuse the rifle takes.
Quick-Release Cantilever Glass Rings
These types of quick-release rifle scope mounts can be used to rapidly remove a scope and connect it to a different rifle. Several scopes can even be switched out if they all use a compatible design mount. These types of mounts are convenient for rifle platforms which are carried a lot, to swap out the optic from the rifle for protecting the scope, or for optics which are used in between multiple rifles or are situationally focused.
Optic Tube Sealing and Gas Purging
Moisture inside your rifle optic can wreck a day on the range and your highly-priced optic by triggering fogging and creating residue within the scope’s tube. A lot of scopes prevent humidity from entering the scope tube with a series of sealing O-rings which are water resistant. Generally, these scopes can be immersed within 20 or 30 feet of water before the water pressure can push moisture past the O-rings. This should be more than enough moisture prevention for basic use rifles, unless you anticipate taking your rifle on boats and are worried about the scope still functioning if it goes overboard and you can still retrieve the firearm.
Gas Purged Glass Tubes
Another element of preventing the buildup of wetness inside of the rifle optic’s tube is filling the tube with a gas like nitrogen. Since this area is currently occupied by the gas, the scope is less impacted by temperature changes and pressure distinctions from the outdoor environment which might possibly enable water vapor to seep in around the seals to fill the void which would otherwise exist. These are good qualities of a good rifle scope to seek out.
