Description
Rifle Scope Product Details
Bbrand M4 1x30mm Red Green Dot Sight Side Mount Reflex Sight Micro Brightness Adjustable Red Green Dot Sight Rifle Scope, 4-5 MOA Dot Size with Len Covers
Specifications:
Magnification: 1x
Objective Diameter: 1.18″ (30mm)
Length: 5.31″(135mm)
Weight: 0.78b.(356g)
Elevation Adjustment: 4-5 MOA
Material: Aluminum alloy
Illumination: Red Green
Lens Coating: Blue multilayer coating
Features:
M4 1x30mm Red Green Dot Sight Made of aluminum alloy. The length of the scope is 5.31″(135mm), the weight only 0.78b(356g). It belongs to mini compact red dot sight and is suitable for quick moving and aiming.
The 30mm objective lens adopts multilayer coating, which can provide light transmittance in any environment, with higher clarity.The red and green dot sight can be used as a hunting scope.
Red Green illumination help to relieve eye fatigue. The red dot sight can be used as a rifle scope, including air rifle scope, assault rifle scope, and tactical rifle scope, etc. The red dot reflex sight have excellent shockproof, waterproof, and fog-proof performance.
We are committed to providing each customer with the highest standard of customer service. If you have any questions after receiving the goods, you can contact us by email, and we will answer you with 12 hours.
Package includes:
1X30mm Red Green Dot Sight
2x Len Covers
Rifle Scope Product Features
RED AND GREEN DOT SIGHT – Compact rifle sight scope with dual illumination adjustment of red and green dot sight, the side mount red dot sight rifle scope allows you effortlessly to adjust the brightness even shooting on the move for hunting and shooting easier.
ULTRA-CLEAR VISION – As a mini red dot sight, the use of a multilayer-coated lens can greatly increase the projection rate and reduce reflections, thereby providing maximum brightness and clarity; the red green dot sight can help you quickly and easily complete hunting and shooting.
EXQUISITE WORKMANSHIP- The red dot sight rifle scope is 135mm (5.31 inches) long and weighs only 356g (0.78 pounds), 4-5 MOA, made of Aluminum Alloythe dot sight suits for air rifle, pistol, and others rifle scope, belongs to a compact red dot sight scope, very suitable for hunting and shooting.
RED AND GREEN ILLUMINATED – The reflex dot sight have red green illuminated with 5 brightness levels for all environment, and is designed with an integral Picatinny mounting deck and flip-open lens caps to ensure an easy installation; it can also provide excellent shockproof, waterproof and anti-fog performance.
100% AFTER-SALES SERVICE- If you have any questions after receiving the goods, please contact us by email, and we will reply to you within 12 hours. We are committed to providing every customer with satisfactory service.
About the Bbrand Brand
Bbrand is a premium manufacturer for rifle scopes, optics, mounting solutions, and other add-ons used for guns like rifles and long guns. They create and manufacture their mounts, scopes, and related products by using building materials which are resilient and long lasting. This includes the Bbrand M4 1x30mm Red Green Dot Sight Side Mount Reflex Sight Micro Brightness Adjustable Red Green Dot Sight Rifle Scope, 4-5 MOA Dot Size with Len Covers by Bbrand. For more shooting goods, visit their website.
Rifle Scope Facts
Rifle scopes permit you to specifically align a rifle at various targets by aligning your eye with the target over a distance. They do this through magnifying the target using a set of lenses within the scope. The scope’s positioning can be adjusted for the consideration of varied environmental elements like wind and elevation increases or decreases to account for bullet drop.
The scope’s function is to help the shooter understand exactly where the bullet will hit based upon the sight picture you are seeing using the optic as you align the scope’s crosshair or reticle with the intended target. A lot of contemporary rifle scopes have about eleven parts which are arranged internally and on the exterior of the scope. These optic pieces consist of the rifle scope’s body, lenses, adjustment dials or turrets, objective focus rings, and other components. Learn about the eleven parts of scopes.
About Scope Varieties
Rifle scopes can be either “first focal plane” or “second focal plane” type of scopes. Considering the finest type of rifle glass depends on what type of shooting you plan to do.
About First Focal Plane Optics
First focal plane glass (FFP) come with the reticle in front of the magnification lens. This induces the reticle to increase in size based on the amount of magnification being used. The outcome is that the reticle measurements are the same at the enhanced range as they are at the non amplified distance. One tick on a mil-dot reticle at 100 yards with no “zoom” is still the exact same tick at 100 yards by using 5x “zoom”. These kinds of scopes are useful for:
- Quick acquisition, long distance types of shooting
- Shooting situations where calculations are marginal
- Experienced shooters who know their target “hold over” plus “lead” relationships for their weapon
- Shooters who don’t mind the reticle is enlarged and takes up more visual sight room than a SFP reticle
Second Focal Plane Optic Facts
Second focal plane optics (SFP) come with the reticle to the rear of the magnification lens. This induces the reticle to stay at the exact same size in connection with the quantity of magnification being used. The end result is that the reticle dimensions alter based on the zoom chosen to shoot over greater ranges because the markings represent different increments which can vary with the zoom. In the FFP illustration with the SFP glass, the 5x “zoom” one hundred yard tick measurement would be 1/5th of the non “zoom” tick reticle measurement. These particular kinds of glass work for:
- Long distance forms of shooting where shooters have more time to make ballistic computations
- Shooting where most of the shots take place within shorter ranges and spaces
- Shooters who choose a clearer optic sight picture without room taken up by the larger size FFP reticle
Zoom for Rifle Glass
The quantity of magnification a scope supplies is figured out by the size, density, and curvatures of the lenses inside of the rifle scope. The zoom of the scope is the “power” of the scope.
Fixed Power Lens Optic Facts
A single power rifle optic or scope will have a magnification number designator like 4×32. This means the zoom power of the scope is 4x power while the objective lens is 32mm. The magnification of this type of optic can not change because it is a set power scope.
Variable Power Lens Rifle Optic Info
Variable power rifle scopes can be adjusted between magnification levels. It will list the magnification degree in a format like 2-10×32. These numbers suggest the zoom of the scope can be set between 2x and 10x power. This always utilizes the powers in-between 2 and 10. The power adjustment is achieved using the power ring part of the scope near the rear of the scope by the eye bell.
Power Levels and Range
Here are some advised scope power settings and the ranges where they may be efficiently used. Consider that high magnification optics and scopes will not be as practical as lower powered scope and optics because excessive zoom can be a bad thing. The same applies to longer distances where the shooter needs to have increased power to see precisely where to best aim the rifle.
Lens Finishing for Rifle Optics
All top teir rifle glass lenses are layered. Lens covering is a vital element of a rifle system when purchasing high end rifle optics and scope systems.
About Glass Lens Coatings – HD Versus ED
Some rifle glass suppliers even use “HD” or high-definition lens coatings that take advantage of various procedures, polarizations, aspects, and chemicals to extract separate color ranges and viewable target definition through the lens. This HD covering is often used with higher density lens glass which reduces light’s ability to refract by means of the lens glass. Some scope makers use “HD” to refer to “ED” indicating extra-low dispersion glass. ED handles how colors are represented on the chromatic spectrum and the chromatic aberration which is similarly called color distortion or fringing. Chromatic aberration can be obvious over objects with hard edges and outlines as light hits the object from specific angles.
Single Finishing Versus Multi-Coating for Rifle Glass
Different scope lenses can also have different coatings applied to them. All lenses normally have at least some kind of treatment or finish applied to them prior to being used in a rifle scope or optic. Due to the fact that the lens isn’t just a raw piece of glass, they require performance enhancing coatings. It becomes part of the carefully tuned optic. It requires a coating to be applied to it so that it will be efficiently functional in many kinds of environments, degrees of sunshine (full VS shade), and other shooting conditions.
This lens treatment can protect the lens from scratches while decreasing glare and other less advantageous things experienced in the shooting environment while sighting in with the scope. The quality of a single coated lens depends on the scope producer and how much you paid for it.
Some scope manufacturers also make it a point to define if their optic lenses are coated or “multi” coated. This suggests the lens has multiple treatments applied to the surfaces of the glass. If a lens gets several treatments, it can show that a producer is taking several steps to combat different natural aspects like an anti-glare covering, a scratch resistant anti-abrasion finishing, followed by a hydrophilic coating. This also does not always imply the multi-coated lens will perform much better than a single coated lens. Being “much better” hinges on the manufacturer’s lens treatment technology and the quality of glass used in developing the rifle scope.
Anti-water Lens Finish
Water on a lens doesn’t support preserving a clear sight picture through an optic at all. Numerous top of the line or high-end scope makers will coat their lenses with a hydrophilic or hydrophobic finishing. The Steiner Optics Nano-Protection is a fine example of this sort of treatment. It treats the exterior surfaces of the Steiner scope lens so the H2O particles can not bind to it or develop surface tension. The outcome is that the water beads slide off of the scope to preserve a clear, water free sight picture.
Optic Installation Choices
Mounting approaches for scopes can be found in a few options. There are the standard scope rings which are separately installed to the scope and one-piece scope mounts which cradle the scope. These various kinds of mounts also usually come in quick release versions which use throw levers which permit rifle shooters to rapidly install and dismount the optics.
Hex Key Rifle Glass Ring Mounts
Basic, clamp-on style mounting scope rings use hex head screws to fix to the flattop style Picatinny scope mounting rails on the tops of rifles. These types of scope mounts use double separate rings to support the scope, and are usually constructed from 7075 T6 billet aluminum which are created for long distance precision shooting. This kind of scope mount is very good for rifle systems which need to have a long lasting, unfailing mount which will not change no matter just how much the scope is moved or abuse the rifle takes. These are the type of mounts you should get for a faithful scope system on a far away scouting or tournament rifle that will almost never need to be altered or recalibrated. Blue 242 Loctite threadlocker can also be used on the mount’s screws to keep the hex screw threads from wiggling out after they are mounted securely in position. An example of these rings are the 30mm type from Vortex Optics. The set usually costs around $200 USD
Quick-Release Cantilever Rifle Optic Ring Mounts
These types of quick-release rifle scope mounts can be used to quickly connect and take off a scope from a rifle. A wide range of scopes can also be switched out if they all use a similar style mount. The quick detach design is CNC machined from anodized 6061 T6 aluminum and the mounting levers attach firmly to a flat top design Picatinny rail. This permits the scope to be sighted in while on the rifle, taken off of the rifle, and remounted while maintaining precision. These kinds of mounts are useful and beneficial for shooting platforms which are transported a lot, to remove the scope glass from the rifle for protection, or for optics which are adopted between several rifles. An example of this mount style is the 30mm mount from the Vortex Optics manufacturer. It typically costs around $250 USD
Rifle Glass Tube Sealing and Gas Purging
Wetness inside your rifle scope can mess up a day on the range and your expensive optic by triggering fogging and producing residue inside of the scope tube. The majority of optics protect against humidity from entering the optical tube with a system of sealing O-rings which are water resistant. Usually, these water resistant scopes can be immersed beneath 20 or 30 feet of water before the water pressure can push moisture past the O-rings. This should be ample moisture content prevention for standard use rifles for hunting and sporting purposes, unless you anticipate taking your rifle on boats and are concerned about the scope still functioning if it is submerged in water and you can still retrieve the firearm.
Gas Purged Scope Tubes
Another element of preventing the buildup of moisture within the rifle optic tube is filling the tube with a gas like nitrogen. Considering that this area is currently occupied by the gas, the optic is less influenced by temperature alterations and pressure differences from the outdoor environment which might possibly permit water vapor to permeate in around the seals to fill the vacuum which would otherwise be there. These are good qualities of a good rifle scope to look for.
