Description
Last update on September 24, 2023 // Source: Amazon API
Rifle Scope Product Details
UTG 6-24X50 1″ Hunter Scope, AO, 36-color Mil-dot, w/ Rings
UTG New Gen 1″ 6-24X50 True Hunter IE Scope w/TS Platform, Front AO, EZ-TAP Illumination Enhancing 36 Color Mil-Dot Reticle, F/B Emerald Coating, Zero Reset/Locking Target Windage/Elevation Knobs, Includes Flip-open Covers, 3″ Sniper Sunshade & Max Strength RG2W1204 Rings.
Rifle Scope Product Features
About this item
Best for Varmint/Predator Hunting, Built on True Strength Platform, Completely Sealed and Nitrogen Filled, Shockproof, Fog proof and Rainproof
Mil-dot Reticle, Emerald Coated Lenses to Achieve Maximum Light Transmission for Best Clarity, Parallax Adjustable from 10 Yds. to Infinity
Patented EZ-TAP Illumination Enhancing (IE) System with Red/Green Dual-Color Mode and 36-Color Mode to Accommodate All Weather/Light Conditions
Illumination Memory Gets You Right Back to the Illumination Setting Last Used, Zero Locking/Resetting Turrets with 1/4 MOA per Click W/E Adjustment
Complete with RG2W1204 High Quality Max Strength QD Twist Lock Picatinny/Weaver Rings, 3″ Sniper Sunshade and Flip-open Lens Caps
About the UTG Manufacturer
UTG is a premium maker for long gun scopes, optics, mounts, and other components used for guns like rifles and long guns. They innovate and build their mounts, scopes, and related products working with elements which are long lasting and durable. This includes the UTG 6-24X50 1″ Hunter Scope, AO, 36-color Mil-dot, w/ Rings by UTG. For additional shooting goods, visit their site.
What You Need to Know About Scopes
Rifle scopes permit you to specifically align a rifle at various targets by aligning your eye with the target at range. They do this through magnification by employing a set of lenses inside the scope. The scope’s alignment can be adjusted for the consideration of separate ecological aspects like wind speed and elevation to make up for bullet drop.
The scope’s function is to understand precisely where the bullet will land based on the sight picture you are viewing with the scope as you line up the scope’s crosshair or reticle with the intended point of impact. Many modern rifle scopes have around 11 parts which are found internally and externally on the scope. These scope parts include the rifle scope’s body, lenses, adjustment dials or turrets, objective focus rings, and other parts. Learn about the eleven parts of scopes.
The Types of Rifle Scopes
Rifle scopes can be either “first focal plane” or “second focal plane” type of optics. Going for the finest type of rifle optic depends on what type of shooting you plan to do.
First Focal Plane Glass Facts
First focal plane glass (FFP) include the reticle ahead of the zoom lens. This causes the reticle to increase in size based upon the level of zoom being used. The result is that the reticle measurements are the same at the enhanced range as they are at the non amplified distance. One tick on a mil-dot reticle at one hundred yards with no “zoom” is still the same tick at one hundred yards by using 5x “zoom”. These types of scopes are valuable for:
- Quick acquisition, far away kinds of shooting
- Shooting situations where calculations are marginal
- Experienced shooters who know their aim point “hold over” as well as “lead” relationships for their long guns
- Shooters who do not mind the reticle is enlarged and takes up more visual eyesight area than a SFP reticle
Second Focal Plane Scopes
Second focal plane scopes (SFP) feature the reticle to the rear of the magnification lens. In the FFP example with the SFP scope, the 5x “zoom” 100 yard tick would be 1/5th of the non “zoom” tick reticle measurement.
- Far away styles of shooting where shooters have extra time to make ballistic estimations
- Shooting where most of the shots happen within much shorter proximities and ranges
- Shooters who desire a clearer optic sight picture without space taken up by the bigger FFP reticle
Magnification for Glass
The level of scope magnification you need on your scope depends on the kind of shooting you choose to do. Pretty much every style of rifle glass supplies some degree of magnification. The level of zoom a scope supplies is identified by the dimension, thickness, and curvatures of the lenses within the rifle scope. The magnifying level of the optic is the “power” of the glass. This suggests what the shooter is checking out through the scope is magnified times the power factor of what can generally be seen by human eyes.
Single Power Lens Glass
A single power rifle scope or optic comes with a magnification number designator like 4×32. This implies the magnification power of the scope is 4x power while the objective lens is 32mm. The zoom of this kind of scope can not fluctuate considering that it is a fixed power optic.
Variable Power Lens Rifle Glass Info
Variable power rifle scopes use enhanced power. The power adjustment is performed using the power ring part of the scope near the back of the scope by the eye bell.
Glass Power Level and Ranges
Here are some advised scope powers and the distances where they may be successfully used. High power rifle scope glass will not be as beneficial as lower magnification level glass considering that too much zoom can be a negative aspect depending on your shooting distance. The very same idea applies to longer distances where the shooter needs to have increased power to see where to properly aim the rifle.
Glass Lens Finishing
All state-of-the-art rifle scope lenses are covered. Lens finish can be a vital aspect of a rifle system when thinking about high end rifle optics and scope equipment.
Details on Lens Coatings – HD Versus ED
Some scope manufacturers likewise use “HD” or high-definition lens finishings which use different methods, components, chemicals, and polarizations to draw out a wide range of colors and viewable definition through the lens. Some scope manufacturers use “HD” to refer to “ED” implying extra-low dispersion glass.
Single Finish Versus Multi-Coating
Different optic lenses can likewise have various coverings used to them. All lenses usually have at least some type of treatment or covering applied to them before they are used in a rifle scope or optic.
Single coated lenses have a treatment applied to them which is normally a protective and enhancing multi-purpose treatment. This lens treatment can protect the lens from scratches while decreasing glare and other less beneficial things experienced in the shooting environment while sighting in with the optic. The quality of a single layered lens depends upon the scope developer and how much money you spent on it. Both are indications of the lens quality.
Some scope manufacturers similarly make it a point to specify if their optic lenses are layered or “multi” covered. Being “much better” depends on the maker’s lens treatment innovation and the quality of materials used in developing the rifle scope.
Hydrophobic Rifle Scope Lens Covering
Water on a lens does not help with maintaining a clear sight picture through a scope at all. Many top of the line and high-end scope companies will coat their lenses with a hydrophilic or hydrophobic anti-water finishing.
Choices for Installing Rifle Glass on Firearms
Installing solutions for scopes are available in a couple of options. There are the standard scope rings which are separately mounted to the scope and one-piece mounts which cradle the scope. These various types of mounts also normally can be found in quick release versions which use manual levers which enable rifle shooters to rapidly install and dismount the glass.
Rifle Optic Mounts with Hex Key Rings
Standard, clamp-on style mounting scope rings use hex head screws to fix to the flattop style Picatinny scope mounting rails on the tops of rifles. These forms of scope mounts use two independent rings to support the scope, and are usually constructed from 7075 T6 billet aluminum or similar materials which are developed for far away precision shooting. This type of scope mount is excellent for rifles which are in need of a durable, unfailing mount which will not move no matter how much the scope is moved or abuse the rifle takes. These are the type of mounts you want for a devoted optics setup on a long distance scouting or interdiction long gun which will pretty much never need to be altered or recalibrated. Blue 242 Loctite threadlocker can also be used on the screws to keep the hex screw threads from wiggling out after they are mounted safely in place. An example of these mounting rings are the 30mm type made by Vortex Optics. The set generally costs around $200 USD
Quick-Release Cantilever Optic Ring Mounting Solutions
These types of quick-release rifle scope mounts can be used to quickly connect and remove a scope from a rifle before reattaching it to a different rifle. Numerous scopes can even be switched out if they all use a compatible design mount. These types of mounts are convenient for rifles which are transferred a lot, to remove the optic from the rifle for protecting the scope, or for scopes which are used between numerous rifles or are situationally focused.
Sealing and Gas Purging for Optic Tubes
Moisture inside your rifle optic can ruin a day of shooting and your pricey optic by triggering fogging and creating residue inside of the scope tube. The majority of scopes avoid moisture from getting in the scope tube with a system of sealing O-rings which are waterproof.
Gas Purged Rifle Optic Tubes
Another part of preventing the buildup of moisture within the rifle scope tube is filling the tube with a gas like nitrogen. Considering that this area is currently taken up by the gas, the glass is less influenced by climate changes and pressure differences from the external environment which might potentially allow water vapor to seep in around the seals to fill the void which would otherwise exist. These are good qualities of a decent rifle scope to look for.
