Description
Rifle Scope Product Details
Toy Gun Sight Red dot Sight Magnification Flip red dot Sight Reflex Sight RMR Scope Holder, Used for MOS or Sliding Cut Accept RMR Pistola 1913 Assembly Scope (Color : Tan)
The inverted dot reflective red dot sight used in the MOS mount and slider has been machined to accept RMR
Please check the product details carefully to ensure that the product you purchased can be applied to avoid unnecessary losses.
Folding red dot reflector (22mm X 16mm)
Fold it down when not in use.
Press the button, the FlipDot lens flips up and opens automatically.
Objective lens diameter: 22mm X 16mm
Magnification: 1X
Crosshair: red dot
Point size: 3 MOA
Length: 2.0 inches
Width: 1.2 inches
Height: 1.1 inches
Weight: 1.0 oz (without dinner plate)
Battery: 1 * CR2032 battery (not included)
installation:
Suitable for MOS and slide rails processed to accept RMR micro-point sight
turn on:
Push the button to deploy the mirror system to the ON position
Shut down:
Simply fold down the lens until it locks in place to close the optical system
Rifle Scope Product Features
Folding red dot reflector (22mm X 16mm)
Fold it down when not in use.
Press the button, the FlipDot lens flips up and opens automatically.
Objective lens diameter: 22mm X 16mm
About the Without Company
Without is a premium supplier for weapon scopes, optics, mounts, and other accessories used for guns like rifles and long guns. They innovate and supply their mounts, scopes, and related products by choosing elements which are durable and long lasting. This includes the Toy Gun Sight Red dot Sight Magnification Flip red dot Sight Reflex Sight RMR Scope Holder, Used for MOS or Sliding Cut Accept RMR Pistola 1913 Assembly Scope (Color : Tan) by Without. For more shooting goods, visit their site.
About Glass
Rifle scopes allow you to specifically align a rifle at different targets by aligning your eye with the target at range. They accomplish this through magnifying the target by employing a set of lenses inside the scope. The scope’s alignment can be adapted to account for numerous ecological factors like wind speed and elevation to account for bullet drop.
The scope’s purpose is to help shooters understand exactly where the bullet will hit based upon the sight picture you are viewing through the scope as you line up the scope’s crosshair or reticle with the intended target. The majority of modern-day rifle scopes and optics have about eleven parts which are arranged internally and outside of the optic. These optic pieces consist of the rifle scope’s body, lenses, modification turrets, objective focus rings, and other components. See all eleven parts of an optic.
Rifle Optic Types
Rifle scopes can be either “first focal plane” or “second focal plane” kind of scopes. The form of focal plane an optic has establishes where the reticle or crosshair is located in regard to the scopes magnifying adjustments. It simply means the reticle is behind or ahead of the magnifying lens of the scope. Picking the most ideal style of rifle scope depends on what kind of shooting you plan on doing.
Info About First Focal Plane Optics
First focal plane glass (FFP) include the reticle before the magnification lens. This triggers the reticle to increase in size based upon the level of zoom being used. The benefit is that the reticle measurements are the same at the amplified distance as they are at the non magnified distance. For example, one tick on a mil-dot reticle at one hundred yards without any “zoom” is still the very same tick at 100 yards using 5x “zoom”. These types of scopes work for:
- Quick acquisition, far away types of shooting
- Shooting scenarios where estimations are very little
- Experienced shooters who recognize their target “hold over” and “lead” ratios for their long guns
- Shooters who don’t mind the reticle is enlarged and uses up more visual sight room than a SFP reticle
About Second Focal Plane Glass
Second focal plane scopes (SFP) include the reticle to the rear of the magnification lens. In the FFP example with the SFP scope, the 5x “zoom” one hundred yard tick would be 1/5th of the non “zoom” tick.
- Far away kinds of shooting where shooters have more time to make ballistic calculations
- Shooting where most shots happen within shorter ranges and spaces
- Shooters who desire a clearer optic picture without room used up by the larger sized FFP reticle
Scope Magnification
The amount of zoom a scope provides is identified by the size, density, and curvatures of the lenses inside of the rifle scope. The zoom of the scope is the “power” of the scope.
Single Power Lens Optic Facts
A single power rifle optic uses a zoom number designator like 4×32. This suggests the magnification power of the scope is 4x power while the objective lens is 32mm. The magnification of this type of optic can not fluctuate considering that it is set from the factory.
Adjustable Power Lens Rifle Glass
Variable power rifle scopes use variable power levels. The power change is performed using the power ring part of the scope near the rear of the scope by the eye bell.
The Power and Range of Optics
Here are some suggested scope power levels and the distances where they may be efficiently used. Highly magnified optics will not be as efficient as lower magnification level optics due to the fact that too much zoom can be a bad thing. The same concept goes for longer ranges where the shooter needs to have adequate power to see where to best aim the rifle.
Rifle Optic Lens Covering
All top of the line rifle optic and scope lenses are coated. Lens finishing can be an essential element of a rifle system when looking at high end rifle optics and scope equipment.
ED Versus HD Glass
Some glass manufacturers will also use “HD” or high-def glass finishes that apply different procedures, polarizations, chemicals, and components to extract a wide range of colors and viewable target definition through the lens. This high-definition finish is normally used with greater density glass which brings down light’s capability to refract through the lens glass. Some scope brands use “HD” to refer to “ED” meaning extra-low dispersion glass. ED handles how certain colors are represented on the chroma spectrum and the chromatic difference or aberration which is similarly called color distortion or fringing. Chromatic aberration is often visible around things with defined shapes as light hits the object from specific angles.
Single Finish Versus Multi-Coating
Different optic lenses can likewise have various coverings used to them. All lenses normally have at least some type of treatment or covering used to them before being used in a rifle scope or optic.
This lens treatment can offer protection to the lens from scratches while lowering glare and other less advantageous things experienced in the shooting environment while sighting in with the scope. The quality of a single layered lens depends on the scope manufacturer and how much you paid for it.
Some scope manufacturers also make it a point to specify if their optic lenses are layered or “multi” coated. Being “better” depends on the producer’s lens treatment innovation and the quality of products used in building the rifle scope.
About Anti-water Finish
Water on a lens doesn’t help with preserving a clear sight picture through a scope at all. Many top of the line and high-end scope companies will coat their lenses with a hydrophobic or hydrophilic finishing.
Scope Installation Choices
Installing approaches for scopes come in a few choices. There are the standard scope rings which are separately mounted to the scope and one-piece scope mounts which cradle the scope. These different kinds of mounts also typically are made in quick release variations which use toss levers which permit rifle shooters to quickly mount and dismount the optics.
Scope Mounting Solutions with Hex Key Rings
Standard, clamp style mounting scope rings use hex head screws to mount to the flattop style Picatinny scope mount rails on rifles. These types of scope mounts use a couple of different rings to support the optic, and are made from 7075 T6 billet aluminum which are created for long distance accuracy shooting. This type of scope mount is wonderful for rifles which need a resilient, rock solid mounting solution which will not move no matter how much the scope is moved or abused.
Scope Mounting Solutions with Quick-Release Cantilever Rings
These types of quick-release rifle scope mounts can be used to rapidly remove a scope from a rifle and reattach it to a different rifle. If they all use a similar design mount, several scopes can often be swapped in the field. The quick detach mount style is CNC crafted from anodized 6061 T6 aluminum and the mounting levers attach nicely to a flat top design Picatinny rail. This permits the scope to be sighted in while on the rifle, removed from the rifle, and remounted back on the rifle while maintaining the original sighting settings. These types of mounts come in handy for shooting platforms which are transported a lot, to remove the glass from the rifle for protection, or for optics which are used between several rifles. An example of this mount type is the 30mm mount from Vortex Optics. It typically costs around $250 USD
Info Around Glass Tube Sealing and Gas Purging
Moisture inside your rifle optic can destroy a day of shooting and your expensive optic by triggering fogging and producing residue inside of the scope tube. Many scopes prevent moisture from entering the scope tube with a system of sealing O-rings which are water resistant.
Rifle Optic Gas Purging
Another element of avoiding the accumulation of wetness inside of the rifle scope’s tube is filling the tube with a gas like nitrogen. Because this space is already taken up by the gas, the optic is less impacted by temperature changes and pressure distinctions from the outdoor environment which could possibly enable water vapor to seep in around the seals to fill the void which would otherwise exist. These are good qualities of a good rifle scope to seek out.
