Description
Last update on February 2, 2023 // Source: Amazon API
Rifle Scope Product Details
Swarovski Optik Medium Scope Guard Cover for the Z6 & Z6I 1.7 – 10x42mm, 2 – 12x50mm, PH 1.5 – 6 x 42mm, 3 – 12x50mm, 2.5 – 10x56mm & AV 4 – 12x50mm Riflescopes
A Swarovski optic High quality scope cover, designed in small, medium and large to fit various Swarovski riflescopes.
Rifle Scope Product Features
Swarovski Optik Medium Scope Guard Cover for the Z6 & Z6I 1.7-10x42mm, 2-12x50mm, PH 1.5-6x42mm, 3-12x50mm, 2.5-10x56mm & AV 4-12x50mm Riflescopes
About the Swarovski Optik Brand
Swarovski Optik is a premium company for rifle scopes, optics, mounting solutions, and other accessories used for guns like rifles and long guns. They create and manufacture their mounts, scopes, and related products by applying building materials which are long lasting and durable. This includes the Swarovski Optik Medium Scope Guard Cover for the Z6 & Z6I 1.7 – 10x42mm, 2 – 12x50mm, PH 1.5 – 6 x 42mm, 3 – 12x50mm, 2.5 – 10x56mm & AV 4 – 12x50mm Riflescopes by Swarovski Optik. For more shooting products, visit their site.
Glass Facts
Rifle scopes allow you to specifically aim a rifle at various targets by aligning your eye with the target over a distance. They do this through magnification by using a set of lenses inside the scope. The scope’s alignment can be dialed in for consideration of various natural aspects like wind and elevation to make up for bullet drop.
The scope’s function is to help shooters understand exactly where the bullet will land based upon the sight picture you are seeing with the optic as you line up the scope’s crosshair or reticle with the target. Most modern rifle optics have about 11 parts which are located within and outside of the optic. These optic pieces consist of the rifle scope’s body, lenses, windage and elevation dials or turrets, focus rings, and other parts. Learn about the eleven parts of scopes.
About Rifle Glass Varieties
Rifle scopes can be either “first focal plane” or “second focal plane” type of optics. Opting for the optimal type of rifle optic is based on what type of shooting you plan to do.
First Focal Plane Glass
Focal plane scopes (FFP) come with the reticle in front of the magnification lens. This triggers the reticle to increase in size based on the extent of zoom being used. The benefit is that the reticle measurements are the same at the enhanced distance as they are at the non magnified range. One tick on a mil-dot reticle at one hundred yards without “zoom” is still the same tick at one hundred yards by using 5x “zoom”. These types of scopes are beneficial for:
- Quick acquisition, far away types of shooting
- Shooting scenarios where computations are low
- Experienced shooters who have an idea for their target “hold over” plus “lead” ratios for their weapon
- Shooters who don’t mind the reticle is enlarged and takes up more visual sight room than a SFP reticle
Second Focal Plane Optics
Second focal plane scopes (SFP) come with the reticle behind the magnification lens. In the FFP example with the SFP scope, the 5x “zoom” 100 yard tick reticle measurement would be 1/5th of the non “zoom” tick reticle measurement.
- Long distance styles of shooting where shooters have increased time to make ballistic estimations
- Shooting where most shots happen within shorter ranges and proximities
- Shooters who desire a clearer optic sight picture without space used up by the larger sized FFP reticle
Rifle Scope Zoom
The quantity of scope magnification you need on your optic depends upon the sort of shooting you plan to do. Pretty much every kind of rifle glass gives some amount of magnification. The level of magnification a scope delivers is identified by the dimension, density, and curves of the lenses inside of the rifle optic. The magnification of the optic is the “power” of the opic. This denotes what the shooter is observing through the scope is amplified times the power element of what can normally be seen by human eyes.
About Single Power Lens Rifle Optics
A single power rifle optic and scope comes with a zoom number designator like 4×32. This means the magnification power of the scope is 4x power while the objective lens is 32mm. The zoom of this kind of optic can not adjust because it is a fixed power optic.
Variable Power Lens Rifle Glass Details
Variable power rifle scopes can be changed between magnification power levels. These types of scopes will note the magnification amount in a configuration such as 2-10×32. These numbers mean the magnification of the scope can be set between 2x and 10x power. This also incorporates the power levels in-between 2 and 10. The power manipulation is achieved by making use of the power ring part of the scope near the back of the scope by the eye bell piece.
Power Levels and Range
Here are some advised scope powers and the ranges where they can be effectively used. Consider that higher magnification optics will not be as practical as lower magnification level scope and optics since increased zoom can be a detractor. The exact same idea applies to longer ranges where the shooter needs adequate power to see exactly where to best aim the rifle.
Details on Rifle Glass Lens Coverings
All current rifle optic and scope lenses are coated. Lens finishing can be an important aspect of a rifle system when looking into high end rifle optics and scope setups.
HD Versus ED Lenses
Some scope manufacturers also use “HD” or high-definition lens finishes which use various techniques, components, polarizations, and chemicals to draw out various colors and viewable quality through the lens. Some scope manufacturers use “HD” to refer to “ED” implying extra-low dispersion glass.
Single Finish Versus Multi-Coating
Different optic lenses can likewise have different finishings applied to them. All lenses normally have at least some type of treatment or coating applied to them prior to being used in a rifle scope or optic.
This lens treatment can protect the lens from scratches while lowering glare and other less helpful things experienced in the shooting environment while sighting in with the scope. The quality of a single coated lens depends on the scope producer and how much you paid for it.
Some scope manufacturers likewise make it a point to specify if their optic lenses are layered or “multi” covered. This means the lens has had multiple treatments applied to them. If a lens receives several treatments, it can prove that a producer is taking multiple actions to combat various natural aspects like an anti-glare covering, a scratch resistant anti-abrasion coating, followed by a hydrophilic finishing. This additionally doesn’t necessarily mean the multi-coated lens will perform better than a single layered lens. Being “much better” is dependent on the manufacturer’s lens treatment innovation and the quality of products used in developing the rifle scope.
Hydrophobic Rifle Optic Lens Covering
Water on a lens doesn’t help with preserving a clear sight picture through a scope at all. Many top of the line and high-end optic companies will coat their lenses with a hydrophobic or hydrophilic coating.
Options for Installing Rifle Glass on Long Guns
Installing options for scopes are available in a couple of choices. There are the standard scope rings which are separately mounted to the optic and one-piece scope mounts which cradle the scope. These different kinds of mounts also normally come in quick release variations which use toss levers which permit rifle shooters to quickly install and remove the scopes.
Rifle Optic Mounting Solutions with Hex Key Rings
Standard, clamp style mounting scope rings use hex head screws to mount to the flattop design Picatinny scope mount rails on rifles. These types of scope mounts use two different rings to support the optic, and are often made from 7075 T6 billet aluminum which are developed for long range accuracy shooting. This type of scope install is fine for rifles which need a durable, rock solid mount which will not move no matter how much the scope is moved or abuse the rifle takes.
Quick-Release Cantilever Rifle Glass Rings
These types of quick-release rifle scope mounts can be used to rapidly detach a scope from a rifle and reattach it to a different rifle. If they all use a similar design mount, a number of scopes can also be swapped out in the field. The quick detach design is CNC crafted from anodized 6061 T6 aluminum and the mounting levers connect securely to a flat top type Picatinny rail. This permits the scope to be sighted in while on the rifle, taken off of the rifle, and remounted while preserving precision. These kinds of mounts are useful and practical for shooting platforms which are transported a lot, to take off the glass from the rifle for protection, or for sight systems which are chosen for use in between multiple rifles. An example of this mount type is the 30mm mount designed by Vortex Optics. It usually costs around $250 USD
What to Know About Rifle Glass Tube Sealing and Gas Purging
Moisture inside your rifle optic can mess up a day of shooting and your expensive optic by triggering fogging and developing residue inside of the scope tube. The majority of scopes avoid wetness from entering the scope tube with a system of sealing O-rings which are waterproof.
Gas Purged Glass Tubes
Another part of avoiding the buildup of wetness within the rifle scope tube is filling the tube with a gas like nitrogen. Because this space is currently occupied by the gas, the glass is less altered by temperature shifts and pressure distinctions from the external environment which could potentially permit water vapor to seep in around the seals to fill the vacuum which would otherwise exist. These are good qualities of a good rifle scope to look for.