Last update on August 14, 2022 // Source: Amazon API
Rifle Scope Product Details
Sparwod 1-6x24mm Rifle Scope,SFP Red Illuminated MOA Reticle Gun Scopes for Out Hunting with 20mm Mount-Green Lens Color
Sparwod 1-6×24 Illuminated Second Focal Plane Rifle Scope with Free 20mm Scope Ring
Click Value:1/2 MOA
EYE RELIEF:4-5 inch
Exit Pupil Diameter25.5-7.5MM
Field of View:(FEET@100YDS)85-25
Parallax SettingIlluminated Red MOA Reticle
Reticle Color:11 Stops red
Reticle Construction:Glass Etched
Optical Coating:Fully Green Multi-Coated
Adjustment Knob: Windage, Elevation, and Adjustable Rheostat
Product Size270X70X60mm / 10.6X2.75X2.36 inch
Package Size:31.5x10x9.5cm/12.4×3.9×3.7 inch
Batteries:One CR2032 3V Lithuim Battery(Not Included )
(1)1-6x24mm Rifle Scopex1
(1)Flip-Up Scope Capsx1
(3)Set of Rings(20mm)x1
Rifle Scope Product Features
Magnification 1-6X with 24mm objective;Field of View:(FEET@100YDS)85-25;Eye Relief:4-5 inch ;Tube Diameter:30mm ;Illumination Modes:11 Stops Red.
Multi-Coated Green Objective Lens,boast higher light transmittance for better clarity performance compared to blue objective lens.
Second Focal Plane,Zero Resetting Easy to Operate,Re-Align the Dial for Easy Reading without Affecting Zero.[BATTERY IS NOT INCLUDED IN THIS PRODUCT]
The Scope has 1/2 MOA/Click Windage & Elevation Adjustments, Zero Reset, and Turret Locks to Prevent Slippage.
Sparwod Scope Rings Easily Mountable to any 20mm Rails.Multi-Coated Optics with O-Ring Sealing and Nitrogen Filling Ensures 100% Water and Fog-Proof.
About the Sparwod Scope Maker
Sparwod is a premium supplier for firearm scopes, optics, mounts, and other components used for firearms like rifles and long guns. They create and supply their mounts and related products by using elements which are long lasting and durable. This includes the Sparwod 1-6x24mm Rifle Scope,SFP Red Illuminated MOA Reticle Gun Scopes for Out Hunting with 20mm Mount-Green Lens Color by Sparwod. For more shooting goods, visit their site.
What You Need to Know About Rifle Scopes
Rifle scopes allow you to specifically align a rifle at various targets by aligning your eye with the target over a range. They accomplish this through magnifying the target by utilizing a series of lenses within the scope. The scope’s alignment can be dialed in to account for varied environmental factors like wind speed and elevation to account for bullet drop.
The scope’s purpose is to understand exactly where the bullet will land based upon the sight picture you are viewing through the optic as you align the scope’s crosshair or reticle with the intended point of impact. Many modern rifle optics have about 11 parts which are located within and on the exterior of the scope. These scope parts include the rifle scope’s body, lenses, adjustment turrets, focus rings, and other components. See all eleven parts of scopes.
The Styles of Rifle Scopes
Rifle scopes can be either “first focal plane” or “second focal plane” kind of scopes. The sort of focal plane a scope has establishes where the reticle or crosshair is located in connection with the optic’s zoom. It actually means the reticle is situated behind or before the magnification lens of the optic. Picking the most effective form of rifle scope depends on what form of hunting or shooting you intend on undertaking.
About First Focal Plane Optics
Focal plane scopes (FFP) include the reticle in front of the magnification lens. These types of scopes are beneficial for:
- Quick acquisition, long distance kinds of shooting
- Shooting situations where calculations are minor
- Experienced shooters who recognize their target “hold over” and also “lead” correlations for their weapon
- Shooters who don’t mind the reticle is enlarged and takes up more visual eyesight space than a SFP reticle
Info on Second Focal Plane Scopes
Second focal plane scopes (SFP) include the reticle to the rear of the zoom lens. This causes the reticle to stay at the exact same scale relative to the amount of zoom being used. The effect is that the reticle measurements adapt based upon the magnification employed to shoot over longer ranges given that the reticle measurements represent different increments which vary with the zoom. In the FFP example with the SFP glass, the 5x “zoom” one hundred yard tick would be 1/5th of the non “zoom” tick reticle measurement. These sorts of glass work for:
- Far away kinds of shooting where shooters have additional time to make ballistic computations
- Shooting where most shots take place within much shorter distances and ranges
- Shooters who prefer a clearer optic picture without room used up by the larger sized FFP reticle
Rifle Scope Magnification
The level of scope zoom you need on your scope is based on the type of shooting you plan to do. Practically every style of rifle glass gives some amount of zoom. The amount of magnification a scope delivers is established by the dimension, thickness, and curvatures of the lens glass within the rifle scope. The magnification level of the scope is the “power” of the glass. This implies what the shooter is looking at through the scope is amplified times the power element of what can normally be seen by human eyes.
Info About Fixed Power Lens Rifle Optics
A single power rifle scope or optic uses a zoom number designator like 4×32. This indicates the magnification power of the scope is 4x power while the objective lens is 32mm. The zoom of this kind of scope can not adjust considering that it is set from the factory.
Info on Variable Power Lens Rifle Glass
Variable power rifle scopes can be changed between magnification increments. These types of scopes will list the zoom degree in a format such as 2-10×32. These numbers mean the magnification of the scope could be changed between 2x and 10x power. This always involves the powers in-between 2 and 10. The power adaptation is accomplished by operating the power ring part of the scope near the rear of the scope by the eye bell piece.
Rifle Scope Power and Range Correlation
Here are some advised scope powers and the ranges where they could be effectively used. Remember that high magnification optics will not be as effective as lower magnification level scopes since too much zoom can be a bad thing. The same idea applies to extended ranges where the shooter needs sufficient power to see precisely where to properly aim the rifle at the target.
Rifle Glass Lens Finish
All modern rifle optic lenses are layered. Lens finish is a significant aspect of a rifle system when looking into high end rifle optics and scope equipment.
ED Versus HD Rifle Glass
Some glass suppliers even use “HD” or high-def lense finishes which apply various procedures, polarizations, rare earth compounds, and elements to draw out different color ranges and viewable target definition through the lens. This high-def covering is typically used with more costly high density lens glass which decreases light’s opportunity to refract through the lens glass. Some scope corporations use “HD” to describe “ED” implying extra-low dispersion glass. ED handles how certain colors are represented on the chroma spectrum and the chromatic aberration or deviance which is also called color distortion or fringing. Chromatic aberration can be obvious around objects with well defined outlines as light hits the item from various angles.
Details on Single Finish Versus Multi-Coating
Various optic lenses can also have various finishings used to them. All lenses usually have at least some type of treatment or finishing applied to them before being used in a rifle scope or optic.
Single covered lenses have a treatment applied to them which is generally a protective and improving multi-purpose treatment. This lens treatment can shield the lens from scratches while lowering glare and other less advantageous things experienced in the shooting environment while sighting in with the optic. The quality of a single covered lens depends upon the scope company and how much money you paid for it. Both the make and cost are indications of the lens quality.
Some scope producers also make it a point to specify if their optic lenses are covered or “multi” coated. Being “better” depends on the producer’s lens treatment technology and the quality of materials used in building the rifle scope.
Anti-water Rifle Scope Lens Finishing
Water on a lens doesn’t support maintaining a clear sight picture through an optic whatsoever. Many top of the line and high-end optic producers will coat their lenses with a hydrophobic or hydrophilic finish. The Steiner Optics Nano-Protection is a fine example of this sort of treatment. It treats the surface area of the Steiner glass lens so the H2O particles can not bind to it or produce surface tension. The outcome is that the water beads sheet off of the scope to keep a clear, water free sight picture.
Rifle Glass Mounting Choices
Mounting solutions for scopes are available in a few options. There are the basic scope rings which are separately installed to the optic and one-piece scope mounts which cradle the scope. These various types of mounts also normally can be found in quick release variations which use manual levers which enable rifle shooters to rapidly mount and dismount the scopes.
Hex Key Optic Rings
Standard, clamp design mounting optic rings use hex head screws to position to the flattop design Picatinny scope mount rails on rifles. These varieties of scope mounts use a pair of separate rings to support the scope, and are made from 7075 T6 billet aluminum which are designed for long distance precision shooting. This form of scope mount is effective for rifle systems which need to have a long lasting, unfailing mount which will not shift no matter how much the scope is moved or abuse the rifle takes. These are the style of mounts you should get for a specialized scope system on a reach out and touch someone hunting or competition long gun that will seldom need to be modified or recalibrated. Blue 242 Loctite threadlocker can also be used on screws to keep the hex screw threads from backing out after they are installed firmly in place. An example of these rings are the 30mm style made by Vortex Optics. The set normally costs around $200 USD
Quick-Release Cantilever Rifle Glass Rings
These types of quick-release rifle scope mounts can be used to quickly remove a scope and attach it to a different rifle. Several scopes can even be swapped out if they all use a similar design mount. These types of mounts come in handy for long guns which are transferred a lot, to swap out the optic from the rifle for protection, or for scopes which are used in between several rifles.
Rifle Optic Tube Sealing and Gas Purging
Moisture inside your rifle scope can ruin a day of shooting and your expensive optic by causing fogging and developing residue inside of the scope tube. Most scopes prevent moisture from entering the scope tube with a system of sealing O-rings which are waterproof.
Scope Gas Purging
Another element of avoiding the accumulation of moisture inside of the rifle scope tube is filling the tube with a gas like nitrogen. Since this space is already occupied by the gas, the glass is less altered by temperature level shifts and pressure variations from the outside environment which could possibly permit water vapor to leak in around the seals to fill the void which would otherwise exist. These are good qualities of a good rifle scope to look for.