Description
Last update on February 7, 2023 // Source: Amazon API
Rifle Scope Product Details
SONICKING 4×32 Compact Rifle Scope Crosshair Optics Hunting Gun Scope with 20mm Free Mounts
Rifle Scope Product Features
About this item
High Precision Hunting Rifle Scope 4 magnification, duplex reticle, 32mm objective lens, 1/4 MOA
Five-lines Crosshair Reticle Easier to rapid target acquisition, perfect suitable for quick moving and aiming
Waterproof, Fogproof & Shockproof One-piece tube construction with Nitrogen filled and O-ring sealed makes this hunting gun scope extremely durable and usable under any weather conditions
Fully Coated Optical Lens Special coating tech provides exterior lens with the ultimate in abrasion resistance, which shows you a flawless sight picture during hunting or shooting
Easy to Install & Lifetime Warranty 2 complementary rings to be easily mounted onto any 20mm mount rails & Lifetime Warranty
Enjoy Outdoor Time with SONICKING Scope
SONICKING 4×32 Rifle Scope
Lenses
The scope lenses are specially coated to reduce light reflections and light scattering, thus increasing light transmission through the scope.
Maintenance
They should be cleaned as carefully as you would a camera lens. Dust and dirt on the surface of the scope should be cleaned with soft cloth or cotton swab. Keep the scope in a place free of acid, alkaline and other corrosives.
Specification of the Scope
Magnification: 4×32
Objective Diameter: 32mm
Exit pupil: 7.5mm
Field of View (ft@100yds):25.1
Dial Adjustment: 1/4 MOA
Mian Body Diameter (in): 1(in)
Diopter Compensation: -3 to +2
Reticle Hold Zero Tips
1. Ocular Lens Adjustment
2. Adjusting Hawke Turrets
3. Pre-Zeroing
4. Zeroing with a rifle or airgun
Repeat until point of aim and point of impact are the same.
5. You have now achieved zero.
Note:
if the point of impact is significantly off target after firing your initial rounds, inspect the mounting of the riflescope to ensure it is not poorly aligned or positioned. If required, try removing the riflescope from the rings and rings from the rifle and starting again. This may remove any error in initial mounting.
Warning:
Never look at the sun with a riflescope, it may permanently damage your eyes.
About the SONICKING Scope Maker
SONICKING is a premium supplier for weapon scopes, optics, mounting solutions, and other components used for firearms like rifles and long guns. They create and manufacture their scopes and related products by making the most of elements which are durable and long lasting. This includes the SONICKING 4×32 Compact Rifle Scope Crosshair Optics Hunting Gun Scope with 20mm Free Mounts by SONICKING. For additional shooting goods, visit their website.
Optic Information
Rifle scopes enable you to exactly align a rifle at various targets by aligning your eye with the target at range. They accomplish this through magnifying the target by utilizing a series of lenses within the scope. The scope’s positioning can be adapted to take into account various environmental things like wind speed and elevation to account for bullet drop.
The scope’s purpose is to help the shooter understand precisely where the bullet will land based on the sight picture you are seeing using the scope as you align the scope’s crosshair or reticle with the intended target. A lot of contemporary rifle optics have about eleven parts which are found internally and externally on the optic. These parts consist of the rifle scope’s body, lenses, adjustment turrets, focus rings, and other elements. Learn about the eleven parts of glass.
The Types of Rifle Scopes
Rifle scopes can be either “first focal plane” or “second focal plane” kind of scopes. The style of focal plane a scope has determines where the reticle or crosshair is located in regard to the scopes magnifying adjustments. It actually implies the reticle is behind or before the magnification lens of the scope. Looking for the most desired type of rifle scope is dependent on what variety of shooting you intend on undertaking.
Info on First Focal Plane Glass
Focal plane scopes (FFP) come with the reticle in front of the magnification lens. This induces the reticle to increase in size based upon the level of zoom being used. The outcome is that the reticle measurements are the same at the magnified distance as they are at the non magnified range. For example, one tick on a mil-dot reticle at one hundred yards without any “zoom” is still the same tick at 100 yards with 5x “zoom”. These types of scopes are beneficial for:
- Quick acquisition, far away kinds of shooting
- Shooting scenarios where calculations are minor
- Experienced shooters who understand their target “hold over” plus “lead” ratios for their firearm
- Shooters who do not mind the reticle is bigger and occupies more visual eyesight area than a SFP reticle
Info About Second Focal Plane Optics
Second focal plane scopes (SFP) include the reticle to the rear of the magnifying lens. This induces the reticle to remain at the exact same scale relative to the quantity of zoom being used. The result is that the reticle dimensions evolve based upon the zoom used to shoot over greater ranges due to the fact that the reticle measurements represent various increments which differ with the zoom level. In the FFP example with the SFP optic, the 5x “zoom” 100 yard tick measurement would be 1/5th of the non “zoom” tick reticle measurement. These particular varieties of glass are useful for:
- Far away types of shooting where shooters have additional time to make ballistic computations
- Shooting where most of the shots take place within much shorter distances and ranges
- Shooters who like a clearer optic sight picture without room taken up by the larger size FFP reticle
Details on Glass Magnification
The extent of scope magnification you need is based on the type of shooting you choose to do. Nearly every type of rifle optic supplies some degree of magnification. The amount of magnification a scope gives is determined by the diameter, density, and curvatures of the lens glass inside of the rifle scope. The magnification of the optic is the “power” of the scope. This suggests what the shooter is observing through the scope is magnified times the power aspect of what can typically be seen by human eyes.
About Single Power Lens Rifle Glass
A single power rifle optic comes with a zoom number designator like 4×32. This indicates the magnification power of the scope is 4x power while the objective lens is 32mm. The magnification of this type of optic can not fluctuate because it is set from the factory.
Adjustable Power Lens Scopes
Variable power rifle scopes use enhanced power. The power adjustment is performed by making use of the power ring part of the scope near the rear of the scope by the eye bell.
Glass Power Level and Ranges
Here are some recommended scope power settings and the distances where they may be successfully used. Remember that higher power optics will not be as efficient as lower powered optics because increased zoom can be a bad thing. The very same idea goes for extended distances where the shooter needs adequate power to see exactly where to best aim the rifle at the target.
About Lens Coatings
All modern-day rifle optic lenses are covered. Lens covering is an essential element of a shooting system when purchasing high end rifle optics and scope systems.
ED Versus HD Optics
Some optic suppliers also use “HD” or high-definition glass coverings that use different processes, rare earth compounds, polarizations, and components to extract a wide range of colors and viewable target definition through lenses. This high-definition finish is typically used with higher density glass which drops light’s chance to refract through the lens glass. Some scope brands use “HD” to refer to “ED” implying extra-low dispersion glass. ED deals with how colors are presented on the chromatic spectrum and the chromatic aberration or difference which is also called color distortion or fringing. Chromatic aberration is often noticeable over items with hard outlines as light hits the object from particular angles.
Single Coating Versus Multi-Coating
Various optic lenses can even have different finishings applied to them. All lenses generally have at least some kind of treatment or finish applied to them before being used in a rifle scope or optic assembly. This is due to the fact that the lens isn’t simply a raw piece of glass. It is part of the carefully tuned optic. It requires a coating to be applied to it so that it will be efficiently usable in numerous kinds of environments, degrees of light (full light VS shaded), and other shooting conditions.
Single layered lenses have a treatment applied to them which is normally a protective and enhancing multi-purpose treatment. This lens treatment can safeguard the lens from scratches while minimizing glare and other less advantageous things experienced in the shooting environment while sighting in with the scope. The quality of a single coated lens depends on the scope developer and just how much you spent for it. Both are indicators of the lens quality.
Some scope producers likewise make it a point to specify if their optic lenses are layered or “multi” covered. This suggests the lens has numerous treatments applied to them. If a lens gets several treatments, it can prove that a maker is taking numerous steps to fight different natural aspects like an anti-glare covering, a scratch resistant anti-abrasion coating, followed by a hydrophilic coating. This additionally does not necessarily indicate the multi-coated lens is better than a single covered lens. Being “better” hinges on the maker’s lens treatment solutions and the quality of materials used in building the rifle optic.
Rifle Glass Lens Hydrophobic Finish
Water on a lens does not assist with maintaining a clear sight picture through a scope in any way. Many top of the line or high-end optic makers will coat their lenses with a hydrophilic or hydrophobic coating. The Steiner Optics Nano-Protection is a fine example of this kind of treatment. It deals with the exterior surfaces of the Steiner optic lens so the water molecules can not bind to it or produce surface tension. The result is that the water beads roll off of the scope to maintain a clear, water free sight picture.
Options for Installing Scopes on Firearms
Mounting options for scopes come in a few options. There are the standard scope rings which are individually mounted to the optic and one-piece scope mounts which cradle the scope. These different types of mounts also typically come in quick release variations which use throw levers which permit rifle shooters to rapidly mount and dismount the scope.
Hex Key Glass Rings
Normal, clamp design mounting scope rings use hex head screws to mount to the flattop style Picatinny scope installation rails on rifles. These types of scope mounts use two separate rings to support the optic, and are made from 7075 T6 billet aluminum which are designed for long distance precision shooting. This type of scope install is excellent for rifles which need a long lasting, sound mounting solution which will not move no matter how much the scope is moved or abused.
Optic Mounting Solutions with Quick-Release Cantilever Rings
These types of quick-release rifle scope mounts can be used to rapidly detach a scope and connect it to a different rifle. Multiple scopes can also be switched out if they all use a compatible style mount. These types of mounts are handy for long guns which are carried a lot, to remove the optic from the rifle for protecting the scope, or for optics which are used in between several rifles.
Rifle Scope Tube Sealing and Gas Purging
Wetness inside your rifle optic can mess up a day of shooting and your costly optic by causing fogging and developing residue inside of the scope tube. Many scopes prevent wetness from going into the scope tube with a system of sealing O-rings which are waterproof.
Info Around Optic Tube Gas Purging
Another part of preventing the accumulation of moisture within the rifle scope tube is filling the tube with a gas like nitrogen. Given that this space is currently occupied by the gas, the scope is less altered by temperature level changes and pressure variations from the outdoor environment which could possibly permit water vapor to seep in around the seals to fill the void which would otherwise be there. These are good qualities of a decent rifle scope to look for.