Description
Last update on February 8, 2023 // Source: Amazon API
Rifle Scope Ring Product Details
Sniper 30 mm High Profile Scope Rings for Picatinny/ Weaver Rail, 4 points contact more Security
Picatinny/ Weaver system. 30 mm scope diameter. High profile. Superior workmanshipship piece let the ring hold tight your precise sporting optics worry-free.
Rifle Scope Ring Product Features
Material: Aircraft-Grade Aluminum Alloy
Fits Picatinny/Weaver rail.
Anodized black matte finish, with 3mm Allan wrench and extra screw
About the Sniper Brand
Sniper is a premium company for long gun scopes, optics, mounting solutions, and other components used for firearms like rifles and long guns. They create and manufacture their scopes, mounts, and related products by using elements which are long lasting and resilient. This includes the Sniper 30 mm High Profile Scope Rings for Picatinny/ Weaver Rail, 4 points contact more Security by Sniper. For additional shooting items, visit their website.
Glass Facts
Rifle scopes permit you to precisely align a rifle at different targets by lining up your eye with the target at range. They accomplish this through zoom by using a set of lenses inside the scope. The scope’s alignment can be dialed in to account for varied environmental things like wind speed and elevation increases or decreases to make up for bullet drop.
The scope’s function is to help shooters understand exactly where the bullet will hit based on the sight picture you are seeing using the optic as you line up the scope’s crosshair or reticle with the intended point of impact. Most modern-day rifle scopes and optics have around 11 parts which are arranged internally and on the exterior of the scope body. These scope parts include the rifle scope’s body, lenses, elevation dials, objective focus rings, and other parts. See all eleven parts of a rifle optical system.
Rifle Glass Varieties
Rifle scopes can be either “first focal plane” or “second focal plane” type of scopes. Deciding on the best type of rifle optic is based around what type of shooting you plan on doing.
Info About First Focal Plane Optics
First focal plane optics (FFP) include the reticle ahead of the zoom lens. This causes the reticle to increase in size based upon the level of zoom being used. The benefit is that the reticle measurements are the same at the enhanced range as they are at the non amplified range. For example, one tick on a mil-dot reticle at 100 yards without any “zoom” is still the very same tick at 100 yards using 5x “zoom”. These types of scopes are valuable for:
- Quick acquisition, far away types of shooting
- Shooting scenarios where estimations are very little
- Experienced shooters who recognize their target “hold over” as well as “lead” ratios for their weapon
- Shooters who do not mind the reticle is enlarged and takes up more visual eyesight room than a SFP reticle
Second Focal Plane Scope Details
Second focal plane optics (SFP) come with the reticle behind the zoom lens. This triggers the reticle to remain at the very same dimensions in relation to the level of zoom being used. The effect is that the reticle measurements adapt based upon the magnification applied to shoot over greater distances considering the markings represent different increments which fluctuate with the zoom level. In the FFP illustration with the SFP scope, the 5x “zoom” 100 yard tick would be 1/5th of the non “zoom” tick reticle measurement. These particular styles of optics work for:
- Far away kinds of shooting where shooters have extra time to make ballistic calculations
- Shooting where most shots happen within much shorter ranges and spaces
- Shooters who want a clearer optic picture with less space taken up by the larger size FFP reticle
Rifle Optic Zoom
The extent of scope zoom you need on your glass depends on the type of shooting you choose to do. Nearly every kind of rifle optic gives some level of magnification. The amount of magnification a scope offers is established by the dimension, thickness, and curvatures of the lens glass within the rifle optic. The magnification level of the scope is the “power” of the glass. This suggests what the shooter is looking at through the scope is amplified times the power aspect of what can usually be seen by human eyes.
About Single Power Lens Optics
A single power rifle scope will have a zoom number designator like 4×32. This indicates the magnification power of the scope is 4x power while the objective lens is 32mm. The magnification of this kind of scope can not fluctuate because it is a set power scope.
Adjustable Power Lens Rifle Glass
Variable power rifle scopes can be changed between magnification power levels. These types of scopes will note the zoom amount in a format such as 2-10×32. These numbers mean the zoom of the scope could be changed between 2x and 10x power. This also utilizes the power levels in-between 2 and 10. The power adaptation is achieved by employing the power ring component of the scope near the back of the scope by the eye bell piece.
The Power and Range Correlation of Rifle Optics
Here are some advised scope powers and the ranges where they could be effectively used. Bear in mind that high power scopes and optics will not be as practical as lower powered optics and scopes due to the fact that excessive magnification can be a detractor. The exact same concept goes for longer ranges where the shooter needs to have enough power to see exactly where to properly aim the rifle at the target.
Lens Finish for Scopes
All present day rifle scope lenses are covered. Lens covering is an important element of a rifle’s setup when looking into high end rifle optics and scope setups.
ED Versus HD Rifle Optics
Some scope manufacturers also use “HD” or high-definition lens coverings which use various techniques, polarizations, elements, and chemicals to draw out different colors and viewable definition through the lens. Some scope manufacturers use “HD” to refer to “ED” meaning extra-low dispersion glass.
Single Finishing Versus Multi-Coating
Different scope lenses can also have different coatings applied to them. All lenses typically have at least some type of treatment or coating applied to them before being used in a rifle scope or optic. Because the lens isn’t just a raw piece of glass, they require performance enhancing coatings. It is part of the carefully tuned optic. It needs to have a finish put on it so that it will be optimally functional in lots of types of environments, degrees of light (full VS shade), and other shooting conditions.
Single covered lenses have a treatment applied to them which is generally a protective and enhancing multi-purpose treatment. This lens treatment can preserve the lens from scratches while lowering glare and other less useful things experienced in the shooting environment while sighting in with the scope. The quality of a single layered lens depends upon the scope company and how much you spent on it. Both the make and cost are indicators of the lens quality.
Some scope producers likewise make it a point to define if their optic lenses are layered or “multi” covered. This indicates the lens has had multiple treatments applied to them. If a lens receives several treatments, it can prove that a company is taking multiple steps to fight various natural factors like an anti-glare covering, a scratch resistant anti-abrasion finishing, followed by a hydrophilic covering. This additionally does not always mean the multi-coated lens is much better than a single covered lens. Being “much better” hinges on the manufacturer’s lens treatment solutions and the quality of glass used in building the rifle scope.
Anti-water Rifle Glass Lens Covering
Water on a lens does not help with preserving a clear sight picture through a scope at all. Many top of the line and high-end optic makers will coat their lenses with a hydrophobic or hydrophilic anti-water finish.
Scope Mounting Alternatives
Installing options for scopes come in a few choices. There are the basic scope rings which are individually mounted to the scope and one-piece scope mounts which cradle the scope. These various types of mounts also generally come in quick release variations which use throw levers which enable rifle shooters to quickly install and dismount the scopes.
Hex Key Rifle Scope Ring Mounts
Normal, clamp style mounting scope rings use hex head screws to mount to the flattop design Picatinny scope installation rails on rifles. These types of scope mounts use two different rings to support the optic, and are often made from 7075 T6 billet aluminum which are created for long distance accuracy shooting. This type of scope mount is wonderful for rifles which need a resilient, sound mounting solution which will not move no matter how much the scope is moved or abuse the rifle takes.
Quick-Release Cantilever Rifle Scope Rings
These types of quick-release rifle scope mounts can be used to rapidly remove a scope and attach it to a different rifle. Multiple scopes can even be swapped out if they all use a similar design mount. These types of mounts are handy for long guns which are transported a lot, to swap out the optic from the rifle for protection, or for optics which are used in between numerous rifles.
Sealing and Gas Purging for Rifle Glass Tubes
Wetness inside your rifle scope can mess up a day of shooting and your expensive optic by causing fogging and creating residue inside of the scope tube. The majority of scopes prevent wetness from entering the scope tube with a system of sealing O-rings which are water resistant.
Gas Purged Rifle Optic Tubes
Another part of avoiding the buildup of moisture within the rifle scope’s tube is filling the tube with a gas like nitrogen. Because this area is already taken up by the gas, the optic is less altered by climate alterations and pressure variations from the outside environment which could possibly permit water vapor to seep in around the seals to fill the vacuum which would otherwise exist. These are good qualities of a good rifle scope to seek out.