Last update on February 3, 2023 // Source: Amazon API
Rifle Scope Product Details
Sightmark Wolfhound 6×44 LR-308 Prismatic Weapon Sight
With the help of ballistic holdovers and a crisp, prismatic optical system, the Sightmark Wolfhound 6×44 LR-308 Prismatic Weapon Sight delivers quick target acquisition and bullet drop compensation. The reticle is ballistic ally matched for .308 Winchester 175 grain cartridge (7.62×51 M118LR). The .5 MOA thick duplex crosshair provides exceptional accuracy at long ranges. The remaining horizontal lines below the central aiming point provide holdover references from 200 to 800 yards. This military-inspired device features an impressive 2.8-inch eye relief – longer than most on the market – for a natural, comfortable shooting stance. Durable enough to shield from impact, the Wolfhound yields scratch-resistant lenses and is made from anodized, high-grade aluminum with a rubber armor finish. It is fully submergible, dust proof and shock proof. Ideal for a variety of challenging shooting situations including 3-gun competitions, hunting and LE applications, the Sightmark Wolfhound 6×44 LR-308 Prismatic Weapon Sight is engineered for the experienced shooter wanting to make their mark.
Rifle Scope Product Features
matched to .308, 175 grain
Red/green reticle illumination
Rubber-armored, single piece 6061-T6 aluminum housing
IP68 waterproof rating – submergible to 10 feet
200-4,000 hours battery life
Fully multi-coated optics
Prismatic optical system
Scratch resistant lenses
Red/Green reticle illumination
Rubber armored, single piece 6061-T6 aluminum housing
IP68 waterproof rating – submergible to 3m/10ft
Fogproof, nitrogen purged
What is in the box
– Sightmark Prismatic Sight
– Rubber lens cover.
– Honeycomb filter.
– CR2032 battery.
Sightmark Wolfhound Prismatic Sight
Hunt down your target with the speed and agility of the military-inspired Sightmark Wolfhound Prismatic Weapon Sight. Designed for quick-target acquisition, the device features an advanced horseshoe dot reticle to compensate for bullet drop and an impressive 2.8-inch eye relief ” longer than most on the market ” for a natural, comfortable shooting stance.
Compact enough to not weigh down the rifle, but durable enough to shield from impact, the device includes a built-in aluminium picatinny mount and rubber armor finish. Fully submergible, both Wolfhounds are 100% waterproof, dust proof and shock proof.
Durable enough to shield from impact, the Wolfhound yields scratch-resistant lenses and is made from anodized, high-grade aluminum with a rubber armor finish.
LQD Mount Included
Sightmark Wolfhound 3×24 HS-223 LQD Prismatic Sight Sightmark Wolfhound 6×44 HS-223 LQD Prismatic Sight Sightmark Wolfhound 6×44 HS-223 Prismatic Sight w/ Mini Shot M-Spec Reflex Sight Sightmark Wolfhound 6×44 LR-308 LQD Prismatic Sight
Reticle type HS-223 HS-223 HS-223 LR-308
Magnification 3x 6x 6x 6x
Objective lens diameter 24mm 44mm 44mm 44mm
Eye relief, in 2.83 2.83 2.83 2.83
Field of view (m@100m) 31.6 15.77 15.77 15.77
Windage/elevation max 160 MOA 70 MOA 70 MOA 70 MOA
MOA adjustment (1 click) 1/2 1/4 1/4 1/4
Dimensions, in 5.9×3 6.7 x 3 6.7 x 3 6.7 x 3
Weight 19.09 oz 25.4 oz 25.4 oz 25.4 oz
About the Sightmark Company
Sightmark is a premium maker for firearm scopes, optics, mounting solutions, and other add-ons used for firearms like rifles and long guns. They create and build their products making the most of materials which are long lasting and durable. This includes the Sightmark Wolfhound 6×44 LR-308 Prismatic Weapon Sight by Sightmark. For additional shooting products, visit their site.
Info Rifle Scopes
Rifle scopes enable you to exactly align a rifle at different targets by aligning your eye with the target at range. They do this through zoom using a series of lenses within the scope. The scope’s alignment can be adapted for consideration of various ecological factors like wind speed and elevation to account for bullet drop.
The scope’s purpose is to understand exactly where the bullet will hit based upon the sight picture you are seeing via the scope as you align the scope’s crosshair or reticle with the intended point of impact. Most contemporary rifle optics have about 11 parts which are found inside and on the exterior of the scope. These optic pieces consist of the rifle scope’s body, lenses, windage and elevation dials or turrets, objective focus rings, and other elements. See all eleven parts of a rifle scope.
About Rifle Optic Styles
Rifle scopes can be either “first focal plane” or “second focal plane” type of scopes. The type of focal plane an optic has determines where the reticle or crosshair is located in connection with the scopes zoom. It simply means the reticle is behind or ahead of the magnifying lens of the scope. Considering the most beneficial kind of rifle glass depends upon what style of shooting or hunting you plan on undertaking.
About First Focal Plane Scopes
Focal plane scopes (FFP) feature the reticle in front of the magnification lens. This triggers the reticle to increase in size based upon the extent of zoom being used. The result is that the reticle measurements are the same at the amplified distance as they are at the non amplified distance. For instance, one tick on a mil-dot reticle at one hundred yards without having “zoom” is still the exact same tick at 100 yards with 5x “zoom”. These kinds of scopes are beneficial for:
- Quick acquisition, long distance kinds of shooting
- Shooting scenarios where estimations are small
- Experienced shooters who recognize their target “hold over” and also “lead” correlations for their long guns
- Shooters who don’t mind the reticle is enlarged and occupies more visual sight area than a SFP reticle
Second Focal Plane Glass Details
Second focal plane glass (SFP) feature the reticle behind the magnifying lens. This causes the reticle to stay at the very same scale in relation to the quantity of magnification being used. The outcome is that the reticle dimensions alter based on the zoom used to shoot over longer ranges considering that the reticle measurements present various increments which fluctuate with the magnification. In the FFP example with the SFP scope, the 5x “zoom” 100 yard tick reticle measurement would be 1/5th of the non “zoom” tick. These particular sorts of glass work for:
- Long distance kinds of shooting where shooters have increased time to make ballistic estimations
- Shooting where most shots happen within much shorter ranges and proximities
- Shooters who choose a clearer optic picture without space used up by the enlarged FFP reticle
Magnification for Optics
The amount of magnification a scope supplies is identified by the size, density, and curvatures of the lenses inside of the rifle scope. The magnification of the scope is the “power” of the scope.
Fixed Power Lens Rifle Optics
A single power rifle optic and scope will have a magnification number designator like 4×32. This means the magnification power of the scope is 4x power while the objective lens is 32mm. The magnification of this type of optic can not adjust considering that it is a fixed power scope.
Adjustable Power Lens Optic Details
Variable power rifle scopes can be adjusted between magnification increments. It will list the zoom degree in a configuration like 2-10×32. These numbers indicate the zoom of the scope could be adjusted in between 2x and 10x power. This additionally incorporates the powers in-between 2 and 10. The power shift is accomplished by operating the power ring component of the scope near the back of the scope by the eye bell.
Power Levels and Range Correlations
Here are some recommended scope power levels and the ranges where they could be efficiently used. Highly magnified scopes will not be as useful as lower powered optics considering that too much zoom can be a negative aspect depending on your shooting distance. The same relates to longer distances where the shooter needs sufficient power to see exactly where to properly aim the rifle at the target.
Details on Scope Lens Coating
All contemporary rifle optic lenses are layered. There are various types and qualities of glass finishes. When thinking about luxury rifle optics and scope setups, Lens finishing can be a vital element of a rifle. The glass lenses are one of the most essential parts of the optic considering that they are what your eye sees through while sighting a rifle in on the point of impact. The finish on the lenses protects the lens exterior and even assists with anti glare capabilities from excess daylight and color exposure.
HD Versus ED Optic Lens Coatings
Some rifle glass companies also use “HD” or high-definition lens coatings which employ various procedures, elements, polarizations, and chemicals to extract different colors and viewable target visibility through the lens. This high-definition finishing is typically used with more costly high density glass which drops light’s potential to refract by means of the lens glass. Some scope producers use “HD” to describe “ED” implying extra-low dispersion glass. ED handles how certain colors are presented on the chromatic spectrum and the chromatic aberration which is similarly called color distortion or fringing. Chromatic aberration may be visible over things with well defined shapes as light hits the object from particular angles.
Info on Single Coating Versus Multi-Coating
Different optic lenses can also have different finishings applied to them. All lenses typically have at least some type of treatment or finish applied to them prior to being used in a rifle scope or optic assembly. Since the lens isn’t simply a raw piece of glass, they require performance enhancing coatings. It is part of the carefully tuned optic. It requires a coating to be applied to it so that the lens will be efficiently functional in many types of environments, degrees of light (full VS shade), and other shooting conditions.
Single covered lenses have a treatment applied to them which is usually a protective and enhancing multi-purpose treatment. This lens treatment can preserve the lens from scratches while reducing glare and other less beneficial things experienced in the shooting environment while sighting in with the scope. The quality of a single covered lens depends on the scope developer and just how much you paid for it. Both are signs of the lens quality.
Some scope producers also make it a point to specify if their optic lenses are covered or “multi” coated. This suggests the lens has had several treatments applied to the surfaces. If a lens gets several treatments, it can prove that a maker is taking numerous steps to combat various natural factors like an anti-glare finish, a scratch resistant anti-abrasion finish, followed by a hydrophilic covering. This also does not necessarily indicate the multi-coated lens will perform better than a single layered lens. Being “much better” depends on the maker’s lens treatment innovation and the quality of materials used in developing the rifle optic.
Hydrophobic Rifle Optic Lens Finishing
Water on a lens does not help with keeping a clear sight picture through a scope at all. Numerous top of the line and military grade optic makers will coat their lenses with a hydrophobic or hydrophilic finish.
Options for Mounting Scopes on Long Guns
Installing approaches for scopes come in a couple of choices. There are the standard scope rings which are separately installed to the scope and one-piece mounts which cradle the scope. These different types of mounts also generally are made in quick release versions which use manual levers which permit rifle shooters to quickly install and dismount the scopes.
Scope Mounts with Hex Key Rings
Standard, clamp design mounting scope rings use hex head screws to mount to the flattop design Picatinny scope mount rails on rifles. These types of scope mounts use a couple of separate rings to support the optic, and are made from 7075 T6 billet aluminum which are developed for long distance accuracy shooting. This type of scope mount is wonderful for rifles which require a long lasting, rock solid mounting solution which will not move no matter how much the scope is moved or abuse the rifle takes.
Quick-Release Cantilever Rifle Optic Ring Mounts
These types of quick-release rifle scope mounts can be used to quickly take off a scope and connect it to a different rifle. Numerous scopes can also be switched out if they all use a compatible style mount. These types of mounts are handy for long guns which are carried a lot, to remove the optic from the rifle for protecting the scope, or for scopes which are used in between numerous rifles.
What to Know About Rifle Glass Tube Sealing and Gas Purging
Wetness inside your rifle optic can destroy a day of shooting and your expensive optic by triggering fogging and creating residue inside of the scope’s tube. A lot of scopes protect against wetness from going into the optical tube with a series of sealing O-rings which are water resistant. Normally, these water-resistant scopes can be submerged under 20 or 30 feet of water before the water pressure can force moisture past the O-rings. This should be more than enough humidity avoidance for standard use rifles, unless you intend on taking your rifle on a boat and are concerned about the scope still functioning if it goes overboard and you can still recover the rifle.
About Rifle Glass Tube Gas Purging
Another element of avoiding the accumulation of wetness within the rifle scope tube is filling the tube with a gas like nitrogen. Because this space is currently taken up by the gas, the optic is less influenced by temp changes and pressure distinctions from the outdoor environment which might potentially permit water vapor to leak in around the seals to fill the vacuum which would otherwise be there. These are good qualities of a decent rifle scope to look for.