Description
Rifle Scope Product Details
Schmidt-Bender 4-16×56 PM II Ultra Bright LP P4LF Reticle 1cm CCW DT MTC LT/ST ZS CT
SCHMIDT & BENDER 4-16×56 PM II Ultra Bright TECHNICAL DATA Field of view m/100 m – 9. 4 – 2. 3 Exit pupil mm – 12. 0 – 3. 5 Eye relief distance mm – 90 Twilight factor – 14, 1 – 15. 0 – 29. 9 Transmission – 96 % Focal plane – 1. Waterproof (mbar)- 300 Reticle – P4LF Optical data dptr. – -3/+2 Parallax adjustment 30 m – infinity Weight (g) ” 958 Length (mm) ” 386 Tube diameter (mm) ” 34 The new 4-16×56 PM II Ultra Bright is the second scope within the new PM II Ultra Bright line. Transmission is remarkable at more than 96% and, combined with a field of view of 9. 4m/100m, this scope is the ideal device for ambitious tactical and sporting shooters. The focus is on precise shooting particularly under low light conditions at medium and long distances. This line of riflescopes sports a revised design: more rounded shapes and flat turrets result in a harmonious interplay of military strength and timeless elegance.
Rifle Scope Product Features
Remarkable transmission and a field of view of 9. 4m/100m makes this rifle scope the ideal device for ambitious tactical and sporting shooters
The focus is on precise shooting particularly under low light conditions at medium and long distances
Double turn elevation adjustment with tactile rotational indicator and More Tactile Clicks (MTC) function, Ultra-flat lockable turret (LT), with a Zero Stop (ZS)
Capped flat windage turret
Revised design: more rounded shapes and flat turrets result in a harmonious interplay of military strength and timeless elegance
PM II Ultra Bright
The brightest tactical Long Range scope of all time. This new product line refined the specifications – a bigger field of view, a greater adjustment range and a comfortable exit pupil.
The latest military development is the PM II Ultra Bright line.
This is an entirely new design, with rounder shapes and flat turrets. The primary consideration here is shooting in poor lighting conditions.
With a transmission of 96 %, the two scopes can also assure optimum target acquisition at dusk without the need for any additional sighting aids. The 4-16×56 PM II Ultra Bright introduce an entirely new marksmen scopes to the market, of interest to police and military, as well as to competition marksmen with high ambitions.
Features:
Ultra-flat lockable double turn with tactile rotational indicator and MTC
This latest development of a lockable double-turn turret is also unusually flat and features an incredible 350 clicks with a more pronounced click at every 10th click. The second turn is indicated by a gold-coloured pin that appears out of the top of the tower.
Flat windage turret with cap
This special turret is intended primarily for use with a tactical reticle. With this, after the sights have been zeroed, no further windage adjustment is required. The turret can then be protected by the cap from accidental misalignment.
Precision Makes The Difference!
Today Schmidt & Bender scopes suit the aims of hunting, police & military or sporting people. They deliver confidence in each shot through superior technology, but also through ultimate standards of quality.
About the Schmidt & Bender Scope Maker
Schmidt & Bender is a premium producer for rifle scopes, optics, mounts, and other components used for firearms like rifles and long guns. They style and build their mounts, scopes, and related products by choosing materials which are long lasting and durable. This includes the Schmidt-Bender 4-16×56 PM II Ultra Bright LP P4LF Reticle 1cm CCW DT MTC LT/ST ZS CT by Schmidt & Bender. For more shooting goods, visit their website.
Facts About Rifle Glass
Rifle scopes allow you to precisely align a rifle at various targets by lining up your eye with the target over a range. They accomplish this through magnification by employing a series of lenses within the scope. The scope’s alignment can be adapted for consideration of varied natural considerations like wind speed and elevation decreases to make up for bullet drop.
The scope’s function is to understand precisely where the bullet will hit based upon the sight picture you are viewing via the scope as you align the scope’s crosshair or reticle with the intended point of impact. The majority of modern rifle scopes have around eleven parts which are found internally and externally on the scope body. These optic pieces consist of the rifle scope’s body, lenses, modification turrets or dials, objective focus rings, and other components. Learn about the eleven parts of scopes.
Rifle Glass Varieties
Rifle scopes can be either “first focal plane” or “second focal plane” type of scopes. The type of focal plane a scope has establishes where the reticle or crosshair lies in relation to the scopes magnification. It simply indicates the reticle is behind or before the magnification lens of the scope. Deciding upon the most reliable sort of rifle optic is based upon what variety of shooting or hunting you plan on doing.
About First Focal Plane Glass
Focal plane scopes (FFP) feature the reticle in front of the magnification lens. This causes the reticle to increase in size based upon the extent of zoom being used. The outcome is that the reticle measurements are the same at the amplified range as they are at the non amplified distance. As an example, one tick on a mil-dot reticle at 100 yards without having “zoom” is still the exact same tick at 100 yards using 5x “zoom”. These kinds of scopes are beneficial for:
- Quick acquisition, long distance types of shooting
- Shooting scenarios where estimations are very little
- Experienced shooters who understand their aim point “hold over” plus “lead” equations for their firearm
- Shooters who do not mind the reticle is bigger and requires more visual sight room than a SFP reticle
About Second Focal Plane Glass
Second focal plane optics (SFP) come with the reticle behind the zoom lens. In the FFP example with the SFP scope, the 5x “zoom” 100 yard tick measurement would be 1/5th of the non “zoom” tick.
- Far away styles of shooting where shooters have more time to make ballistic calculations
- Shooting where most shots happen within much shorter ranges and distances
- Shooters who select a clearer optic sight picture with less room taken up by the enlarged FFP reticle
Rifle Glass Zoom
The extent of scope magnification you require depends upon the form of shooting you would like to do. Nearly every style of rifle glass gives some amount of magnification. The level of magnification a scope delivers is identified by the size, density, and curves of the lens glass within the rifle scope. The magnifying level of the optic is the “power” of the opic. This indicates what the shooter is checking out through the scope is magnified times the power factor of what can generally be seen by human eyes.
About Fixed Power Lens Optics
A single power rifle optic uses a magnification number designator like 4×32. This means the zoom power of the scope is 4x power while the objective lens is 32mm. The zoom of this type of scope can not adjust because it is a fixed power scope.
Adjustable Power Lens Rifle Glass
Variable power rifle scopes use variable power levels. The power adjustment is handled using the power ring part of the scope near the back of the scope by the eye bell.
The Power Level and Range Correlation of Glass
Here are some advised scope powers and the ranges where they may be efficiently used. Highly magnified rifle scope glass will not be as beneficial as lower magnification level optics because too much zoom can be a negative aspect depending on your shooting distance. The same goes for extended ranges where the shooter needs adequate power to see precisely where to best aim the rifle at the target.
Optic Lens Finish
All contemporary rifle scope lenses are coated. There are various types and qualities of lens coverings. When researching luxury rifle targeting systems, Lens finish can be a crucial element of a rifle. The lenses are one of the most essential pieces of the optic due to the fact that they are what your eye sees through while sighting a rifle in on the point of impact. The covering on the lenses protects the lens surface and also assists with anti glare from excess sunrays and color perception.
About Scope Lens Coatings – HD Versus ED
Some rifle scope companies additionally use “HD” or high-def lens coatings that take advantage of various procedures, aspects, chemical substances, and polarizations to extract various color ranges and viewable target visibility through the lens. This high-definition finishing is frequently used with more costly high density glass which lowers light’s potential to refract through the lens glass. Some scope manufacturers use “HD” to refer to “ED” suggesting extra-low dispersion glass. ED deals with how colors are presented on the chromatic spectrum and the chromatic aberration or difference which is similarly called color distortion or fringing. Chromatic aberration is often visible over items with defined outlines as light hits the object from various angles.
Single Scope Lens Covering Versus Multi-Coating
Various scope lenses can even have different coatings applied to them. All lenses usually have at least some kind of treatment or finish applied to them prior to being used in a rifle scope or optic assembly. Since the lens isn’t just a raw piece of glass, they require performance enhancing coatings. It becomes part of the carefully tuned optic. It must have a coating applied to it so that it will be optimally usable in numerous kinds of environments, degrees of sunlight (full VS shade), and other shooting conditions.
Single covered lenses have a treatment applied to them which is usually a protective and improving multi-purpose treatment. This lens treatment can protect the lens from scratches while lowering glare and other less beneficial things experienced in the shooting environment while sighting in with the scope. The quality of a single covered lens depends on the scope designer and just how much you spent for it. The scope’s maker and cost are signs of the lens quality.
Some scope manufacturers also make it a point to specify if their optic lenses are layered or “multi” covered. Being “much better” depends on the maker’s lens treatment technology and the quality of materials used in building the rifle scope.
Details on Hydrophobic Coating
Water on a lens does not help with maintaining a clear sight picture through a scope at all. Lots of top of the line and military grade optic makers will coat their lenses with a hydrophobic or hydrophilic covering.
Choices for Mounting Glass on Long Guns
Mounting options for scopes are available in a couple of options. There are the basic scope rings which are separately installed to the scope and one-piece mounts which cradle the scope. These different kinds of mounts also normally can be found in quick release versions which use toss levers which permit rifle operators to rapidly install and dismount the scope.
Optic Mounts with Hex Key Rings
Standard, clamp design mounting scope rings use hex head screws to mount to the flattop design Picatinny scope mount rails on rifles. These types of scope mounts use a couple of different rings to support the optic, and are made from 7075 T6 billet aluminum which are created for long distance precision shooting. This type of scope install is great for rifles which require a resilient, rock solid mount which will not move no matter how much the scope is moved or abuse the rifle takes.
Quick-Release Cantilever Rifle Scope Ring Mounts
These types of quick-release rifle scope mounts can be used to rapidly remove a scope from a rifle and reattach it to a different rifle. If they all use a similar style mount, several scopes can often be switched out. The quick detach mount style is CNC machined from anodized 6061 T6 aluminum and the mounting levers connect firmly to a flat top type Picatinny rail. This enables the scope to be sighted in while on the rifle, removed from the rifle, and remounted while preserving accuracy. These kinds of mounts are useful and convenient for rifles which are shipped a lot, to remove the glass from the rifle for protection, or for optics which are used in between multiple rifles. An example of this mount style is the 30mm mount designed by the Vortex Optics brand. It typically costs around $250 USD
Rifle Optic Tube Sealing and Gas Purging
Moisture inside your rifle scope can destroy a day of shooting and your costly optic by triggering fogging and developing residue inside of the scope tube. Most scopes prevent wetness from going into the scope tube with a system of sealing O-rings which are water resistant.
Rifle Optic Gas Purging
Another part of preventing the buildup of moisture within the rifle scope’s tube is filling the tube with a gas like nitrogen. Considering that this space is already occupied by the gas, the optic is less influenced by climate changes and pressure variations from the outside environment which might potentially enable water vapor to permeate in around the seals to fill the void which would otherwise exist. These are good qualities of a good rifle scope to seek out.
