Description
Last update on March 30, 2023 // Source: Amazon API
Rifle Scope Product Details
Kalinka Optics Pilade 1×42 Red Dot, Weaver Screw Mount
This is the best Russian small open collimator “red dot” combat optic from Pilade manufacturer using laser-generated “heads-up display” (HUD) technology to superimpose a reticle pattern onto a filtered lens to provide precision CQB target acquisition. This system presents an unobstructed field of view, in 1x power which allows for extremely comfortable, “both eyes open” shooting. On average, most users will see a 50% gain in target acquisition times and a 50% smaller shot group at 100 meters versus iron sights. It is designed for engaging fast moving targets and targets appearing for a short period of time in close quarters and urban combat situations in various light conditions. It provides clear targeting from 104 lx to 10-2 lx (daylight, twilight and moonlight), one- or two-eye targeting, is very effective when shooting from moving vehicles, and allows for perfect kill shots on fast-moving, small and spontaneously appearing target. First and most important is a choice of three aiming marks – single dot, open T, open T with a dot. All these can be selected by the simple push of a button, as opposed to having a dial them in. “Two buttons” intuitively clear interface lets you easily adjust the brigtness, turn the scope on/off and select the mark. The sight provides 3.5 MOA dot and 15 with 16-pos brightness adjustment. At the rear and right are the adjuster screws. Marks in English make the adjusting procedure very simple. It is a tough, well built Red Dot with superior features at a fraction of the cost of other similar scopes. A definite Best Buy, it’s lightweight, shockproof, waterproof, has a sealed body, and is for use in severe conditions. It comes with a battery, adjusting limb, screw driver and manual.
Rifle Scope Product Features
Combat optic from Pilade manufacturer using laser-generated “heads-up display” (HUD) technology to superimpose a reticle pattern onto a filtered lens to provide precision CQB target acquisition.
This system presents an unobstructed field of view, in 1x power which allows for extremely comfortable, “both eyes open” shooting.
It is designed for engaging fast moving targets and targets appearing for a short period of time in close quarters and urban combat situations in various light conditions and very effective when shooting from moving vehicles, and allows for perfect kill shots on fast-moving, small and spontaneously appearing target.
three aiming marks – single dot, open T, open T with a dot. All these can be selected by the simple push of a button
The scope is lightweight, shockproof, waterproof, has a sealed body, and is for use in severe conditions. “Two buttons” intuitively clear interface lets you easily adjust the brigtness, turn the scope on/off and select the mark.
About the Kalinka Optics Company
Kalinka Optics is a premium company for long gun scopes, optics, mounting solutions, and other components used for firearms like rifles and long guns. They innovate and build their scopes, mounts, and related products using materials which are resilient and long lasting. This includes the Kalinka Optics Pilade 1×42 Red Dot, Weaver Screw Mount by Kalinka Optics. For additional shooting goods, visit their site.
Rifle Optic Details
Rifle scopes enable you to exactly aim a rifle at various targets by aligning your eye with the target over a range. They do this through magnifying the target using a set of lenses inside the scope. The scope’s alignment can be adjusted to take into account different natural elements like wind speed and elevation increases to make up for bullet drop.
The scope’s purpose is to help the shooter understand precisely where the bullet will land based upon the sight picture you are seeing via the scope as you line up the scope’s crosshair or reticle with the target. Most modern-day rifle scopes have around 11 parts which are arranged internally and externally on the scope. These optic pieces consist of the rifle scope’s body, lenses, adjustment turrets, objective focus rings, and other components. See all eleven parts of an optic.
Rifle Glass Types
Rifle scopes can be either “first focal plane” or “second focal plane” kind of scopes. The sort of focal plane an optic has identifies where the reticle or crosshair lies in connection with the optic’s magnifying adjustments. It literally indicates the reticle is behind or before the magnifying lens of the scope. Deciding upon the most reliable sort of rifle scope is dependent on what form of shooting you intend on undertaking.
About First Focal Plane Glass
Focal plane scopes (FFP) include the reticle in front of the zoom lens. These kinds of scopes are beneficial for:
- Quick acquisition, far away kinds of shooting
- Shooting situations where calculations are minor
- Experienced shooters who have an idea for their target “hold over” and “lead” equations for their firearm
- Shooters who don’t mind the reticle is enlarged and uses up more visual eyesight area than a SFP reticle
Info on Second Focal Plane Glass
Second focal plane scopes (SFP) come with the reticle to the rear of the magnifying lens. This causes the reticle to stay at the very same scale in connection with the level of magnification being used. The effect is that the reticle dimensions adjust based upon the zoom applied to shoot over greater distances due to the fact that the markings present distinct increments which change with the zoom level. In the FFP illustration with the SFP optic, the 5x “zoom” 100 yard tick reticle measurement would be 1/5th of the non “zoom” tick measurement. These particular sorts of scopes are beneficial for:
- Far away styles of shooting where shooters have additional time to make ballistic estimations
- Shooting where most of the shots occur within much shorter ranges and proximities
- Shooters who want a clearer optic picture without area taken up by the larger size FFP reticle
Zoom for Rifle Scopes
The amount of scope zoom you need on your optic is based on the type of shooting you desire to do. Virtually every type of rifle glass gives some level of magnification. The quantity of zoom a scope supplies is established by the diameter, density, and curves of the lens glass inside of the rifle scope. The zoom of the optic is the “power” of the glass. This suggests what the shooter is looking at through the scope is magnified times the power aspect of what can normally be seen by human eyes.
Fixed Single Power Lens Optic Facts
A single power rifle optic uses a magnification number designator like 4×32. This means the magnification power of the scope is 4x power while the objective lens is 32mm. The magnification of this kind of scope can not change since it is fixed.
Variable Power Lens Glass Facts
Variable power rifle scopes have adjustable power. It will list the zoom level in a format like 2-10×32. These numbers mean the magnification of the scope can be changed between 2x and 10x power. This always involves the power levels in-between 2 and 10. The power shift is accomplished by applying the power ring part of the scope near the back of the scope by the eye bell.
Rifle Glass Power Level and Ranges
Here are some advised scope power levels and the ranges where they can be effectively used. Keep in mind that higher power optics will not be as efficient as lower magnification level scope and optics since too much magnification can be a detractor. The same goes for extended ranges where the shooter needs adequate power to see precisely where to best aim the rifle.
Info on Optic Lens Covering
All modern-day rifle optic lenses are covered. Lens finish is a vital element of a rifle when considering high end rifle optics and scope systems.
About Lens Coatings – HD Versus ED
Some scope brands likewise use “HD” or high-definition lens finishes which use different methods, polarizations, elements, and chemicals to draw out different colors and viewable definition through the lens. Some scope makers use “HD” to refer to “ED” to signify the lens has extra-low dispersion glass.
Single Finish Versus Multi-Coating
Different optic lenses can also have different finishes used to them. All lenses normally have at least some type of treatment or finishing used to them before being used in a rifle scope or optic.
This lens treatment can safeguard the lens from scratches while lowering glare and other less beneficial things experienced in the shooting environment while sighting in with the scope. The quality of a single covered lens depends on the scope producer and how much you paid for it.
Some scope makers also make it a point to define if their optic lenses are covered or “multi” coated. Being “better” depends on the manufacturer’s lens treatment innovation and the quality of products used in building the rifle scope.
Rifle Optic Lens Hydrophobic Coating
Water on a scope lens does not help with preserving a clear sight picture through an optic at all. Many top of the line or premium scope producers will coat their lenses with a hydrophobic or hydrophilic finish. The Steiner Optics Nano-Protection is a good example of this kind of treatment. It treats the surface of the Steiner scope lens so the water molecules can not bind to it or develop surface tension. The result is that the water beads move off of the scope to preserve a clear, water free sight picture.
Rifle Scope Mounting Options
Mounting approaches for scopes can be found in a few options. There are the standard scope rings which are individually installed to the optic and one-piece mounts which cradle the scope. These various kinds of mounts also normally can be found in quick release versions which use toss levers which allow rifle shooters to rapidly mount and remove the glass.
Hex Key Rifle Scope Ring Mounts
Standard, clamp type mounting optic rings use hex head screws to install to the flattop design Picatinny scope mounting rails on rifles. These forms of scope mounts use a pair of independent rings to support the scope, and are usually constructed from 7075 T6 billet aluminum which are developed for long distance precision shooting. This kind of scope mount is excellent for rifle systems which need a resilient, hard use mount which will not move no matter just how much the scope is moved or jarring the rifle takes. These are the type of mounts you should have for a devoted optics setup on a far away hunting or competition rifle that will seldom need to be altered or recalibrated. Blue 242 Loctite threadlocker can additionally be used on the screws to keep the hex screws from wiggling out after they are mounted tightly in place. An example of these rings are the 30mm style from Vortex Optics. The set usually costs around $200 USD
Glass Mounts with Quick-Release Cantilever Rings
These types of quick-release rifle scope mounts can be used to rapidly attach and remove a scope from a rifle before reattaching it to a different rifle. Several scopes can also be switched out if they all use a similar design mount. These types of mounts come in handy for rifles which are carried a lot, to remove the optic from the rifle for protecting the scope, or for optics which are used in between several rifles or are situationally focused.
Sealing and Gas Purging for Rifle Optic Tubes
Moisture inside your rifle glass can spoil a day on the range and your costly optic by resulting in fogging and generating residue within the scope’s tube. A lot of scopes protect against humidity from going into the optical tube with a series of sealing O-rings which are water resistant. Usually, these water-resistant scopes can be submerged underneath 20 or 30 feet of water before the water pressure can force moisture past the O-rings. This should be plenty of moisture avoidance for conventional use rifles for hunting and sporting purposes, unless you plan on taking your rifle on a boat and are concerned about the optic still working if it goes over the side and you can still retrieve the rifle.
Info Around Optic Tube Gas Purging
Another element of avoiding the buildup of wetness inside of the rifle scope tube is filling the tube with a gas like nitrogen. Because this space is already taken up by the gas, the scope is less impacted by condition shifts and pressure variations from the outside environment which might possibly allow water vapor to permeate in around the seals to fill the vacuum which would otherwise exist. These are good qualities of a good rifle scope to seek out.
