Description
Rifle Scope Product Details
Kalinka Optics Pilade 1×30 Red Dot, Weaver Screw Mount
Russian small open collimator “red dot” combat optic from Pilade manufacturer using laser-generated “heads-up display” (HUD) technology to superimpose a reticle pattern onto a filtered lens to provide precision CQB target acquisition. This system presents an unobstructed field of view, in 1x power which allows for extremely comfortable, “both eyes open” shooting. On average, most users will see a 50% gain in target acquisition times and a 50% smaller shot group at 100 meters versus iron sights. It is designed for engaging fast moving targets and targets appearing for a short period of time in close quarters and urban combat situations in various light conditions. It provides clear targeting from 104 lx to 10-2 lx (daylight, twilight and moonlight), one- or two-eye targeting, is very effective when shooting from moving vehicles, and allows for perfect kill shots on fast-moving, small and spontaneously appearing target. First and most important is a choice of three aiming marks – single dot, open T, open T with a dot. All these can be selected by the simple push and hold of a button, as opposed to having a dial them in. “Two buttons” intuitively clear interface lets you easily adjust the brigtness, turn the scope on/off, select the mark and switch between manual/automatic brightness control. New option is a magnetic battery cap so you never miss the battery once it’s put to the cap. The scope goes off automatically after 4 hours of usage. The sight provides 4 MOA dot and 65 MOA open T mark with 16-pos brightness adjustment. At the rear and right are the adjuster screws. Marks in English make the adjusting procedure very simple. It is a tough, well built Red Dot with superior features at a fraction of the cost of other similar scopes. It comes with a battery, adjusting limb, screw driver and manual.
Rifle Scope Product Features
Combat optic from Pilade manufacturer using laser-generated “heads-up display” (HUD) technology to superimpose a reticle pattern onto a filtered lens to provide precision CQB target acquisition.
This system presents an unobstructed field of view, in 1x power which allows for extremely comfortable, “both eyes open” shooting.
It is designed for engaging fast moving targets and targets appearing for a short period of time in close quarters and urban combat situations in various light conditions and very effective when shooting from moving vehicles, and allows for perfect kill shots on fast-moving, small and spontaneously appearing target.
three aiming marks – single dot, open T, open T with a dot. All these can be selected by the simple push of a button
The scope is lightweight, shockproof, waterproof, has a sealed body, and is for use in severe conditions. “Two buttons” intuitively clear interface lets you easily adjust the brigtness, turn the scope on/off and select the mark.
About the Kalinka Optics Brand
Kalinka Optics is a premium maker for firearm scopes, optics, mounts, and other components used for guns like rifles and long guns. They innovate and make their mounts, scopes, and related products by applying building materials which are long lasting and resilient. This includes the Kalinka Optics Pilade 1×30 Red Dot, Weaver Screw Mount by Kalinka Optics. For more shooting goods, visit their site.
Glass Information
Rifle scopes allow you to exactly align a rifle at various targets by aligning your eye with the target at range. They accomplish this through magnifying the target by utilizing a set of lenses within the scope. The scope’s alignment can be adapted for the consideration of various natural aspects like wind and elevation decreases to make up for bullet drop.
The scope’s purpose is to help the shooter understand exactly where the bullet will land based upon the sight picture you are seeing with the optic as you line up the scope’s crosshair or reticle with the target. Many modern-day rifle optics have about eleven parts which are located within and externally on the scope. These optic pieces include the rifle scope’s body, lenses, elevation turrets, objective focus rings, and other elements. See all eleven parts of a rifle optical system.
The Types of Rifle Scopes
Rifle scopes can be either “first focal plane” or “second focal plane” kind of scopes. The style of focal plane a scope has determines where the reticle or crosshair lies in regard to the scopes magnifying adjustments. It actually implies the reticle is situated behind or ahead of the magnifying lens of the optic. Looking for the best form of rifle glass is based on what style of shooting or hunting you anticipate doing.
First Focal Plane Optics
Focal plane scopes (FFP) feature the reticle in front of the magnification lens. These kinds of scopes are useful for:
- Quick acquisition, long distance types of shooting
- Shooting situations where computations are very little
- Experienced shooters who recognize their aim point “hold over” plus “lead” ratios for their long gun
- Shooters who do not mind the reticle is enlarged and occupies more visual sight area than a SFP reticle
Second Focal Plane Optics
Second focal plane optics (SFP) feature the reticle behind the zoom lens. In the FFP example with the SFP scope, the 5x “zoom” 100 yard tick would be 1/5th of the non “zoom” tick measurement.
- Long distance forms of shooting where shooters have additional time to make ballistic calculations
- Shooting where most shots take place within shorter ranges and distances
- Shooters who prefer a clearer optic sight picture with less space used up by the enlarged FFP reticle
About Glass Magnification
The extent of scope zoom you need on your scope depends upon the style of shooting you plan to do. Pretty much every type of rifle optic delivers some level of magnification. The volume of zoom a scope gives is established by the size, thickness, and curvatures of the lenses within the rifle scope. The magnifying level of the optic is the “power” of the scope. This implies what the shooter is observing through the scope is amplified times the power factor of what can normally be seen by human eyes.
Single Power Lens Scope Details
A single power rifle optic uses a magnification number designator like 4×32. This indicates the magnification power of the scope is 4x power and the objective lens is 32mm. The zoom of this kind of optic can not change because it is a fixed power optic.
Variable Power Lens Rifle Glass
Variable power rifle scopes can be changed between magnification power levels. These types of scopes will note the zoom amount in a format like 2-10×32. These numbers suggest the magnification of the scope could be set in between 2x and 10x power. This additionally incorporates the power levels in-between 2 and 10. The power adaptation is achieved by employing the power ring part of the scope near the back of the scope by the eye bell piece.
The Power Level and Range of Rifle Optics
Here are some advised scope power settings and the ranges where they may be successfully used. Remember that high power scopes and optics will not be as efficient as lower magnification level glass due to the fact that too much zoom can be a detractor. The same concept goes for longer distances where the shooter needs sufficient power to see precisely where to best aim the rifle at the target.
Info on Lens Finish
All modern-day rifle scope and optic lenses are layered. There are different types and qualities of glass finishes. When thinking about luxury rifle optical devices, Lens covering can be an essential component of defining the rifle’s capability. The glass lenses are among the most significant components of the scope given that they are what your eye sees through while sighting a rifle in on the target. The finishing on the lenses offers protection to the lens surface and even improves anti glare from refracted light and color recognition.
HD Versus ED Lenses
Some scope manufacturers likewise use “HD” or high-definition lens finishings which use various processes, chemicals, polarizations, and components to draw out different colors and viewable definition through the lens. Some scope producers use “HD” to refer to “ED” meaning extra-low dispersion glass.
What to Know About Single Finishing Versus Multi-Coating
Various optic lenses can likewise have different coatings used to them. All lenses normally have at least some type of treatment or coating used to them before they are used in a rifle scope or optic.
This lens treatment can protect the lens from scratches while minimizing glare and other less useful things experienced in the shooting environment while sighting in with the scope. The quality of a single coated lens depends on the scope producer and how much you paid for it.
Some scope producers also make it a point to specify if their optic lenses are layered or “multi” coated. Being “better” depends on the manufacturer’s lens treatment innovation and the quality of products used in building the rifle scope.
Anti-water Coating for Rifle Optics
Water on an optical lens does not improve preserving a clear sight picture through an optic at all. Numerous top of the line or high-end scope producers will coat their lenses with a hydrophobic or hydrophilic covering. The Steiner Optics Nano-Protection is a fine example of this sort of treatment. It provides protection for the surface of the Steiner scope lens so the water particles can not bind to it or create surface tension. The outcome is that the water beads roll off of the scope to maintain a clear, water free sight picture.
Choices for Mounting Glass on Long Guns
Mounting approaches for scopes come in a few options. There are the basic scope rings which are separately installed to the optic and one-piece mounts which cradle the scope. These different types of mounts also usually come in quick release variations which use throw levers which permit rifle operators to quickly install and remove the scope.
Hex Key Rifle Optic Rings
Basic, clamp design mounting optic rings use hex head screws to mount to the flattop style Picatinny scope mounting rails on the tops of rifles. These varieties of scope mounts use a pair of independent rings to support the scope, and are normally constructed from 7075 T6 billet aluminum or similar materials which are developed for long distance accuracy shooting. This type of scope mount is ideal for rifles which require a long lasting, hard use mount which will not shift regardless of just how much the scope is moved or abuse the rifle takes. These are the design of mounts you should have for a specialized scope setup on a long distance hunting or tournament rifle which will pretty much never need to be changed or recalibrated. Blue 242 Loctite threadlocker can also be used on the scope mount screws to prevent the hex screws from backing out after they are mounted securely in position. An example of these rings are the 30mm style made by the Vortex Optics company. The set typically costs around $200 USD
Quick-Release Cantilever Optic Ring Mounts
These types of quick-release rifle scope mounts can be used to quickly connect and remove a scope from a rifle before reattaching it to a different rifle. Several scopes can even be switched out if they all use a compatible design mount. These types of mounts are convenient for rifles which are carried a lot, to swap out the optic from the rifle for protecting the scope, or for scopes which are used between multiple rifles or are situationally focused.
Sealing and Gas Purging for Scope Tubes
Moisture inside your rifle scope can wreck a day on the range and your highly-priced optic by causing fogging and producing residue inside of the scope’s tube. Most scopes protect against moisture from entering the optical tube with a series of sealing O-rings which are waterproof. Usually, these water resistant scopes can be submerged within 20 or 30 feet of water before the water pressure can push moisture past the O-rings. This should be more than enough humidity prevention for common use rifles for hunting and sporting purposes, unless you anticipate taking your rifle sailing and are worried about the optic still working if it goes over the side and you can still recover the firearm.
Details on Optic Tube Gas Purging
Another component of preventing the buildup of wetness within the rifle optic’s tube is filling the tube with a gas like nitrogen. Considering that this space is currently taken up by the gas, the glass is less affected by condition changes and pressure differences from the outdoor environment which may potentially permit water vapor to seep in around the seals to fill the void which would otherwise be there. These are good qualities of a decent rifle scope to seek out.
