Description
Rifle Scope Product Details
Athlon Optics Midas TAC Riflescope 4-16×44 30mm APRS2 FFP MIL Reticle
Rifle Scope Product Features
0.1 MIL Click Value, 30 MIL Total Elevation Adjustment, 10 Yard to Infinity Parallax Adjustment
First focal plane reticle stays valid at all power settings allowing you to fully utilize the specially designed reticle that shrinks or grows along with your target as you zoom in or out.
HD Glass gives you better light transmission, brighter, and sharper image.
Precision Zero Stop System The system allows you to lock down your zero position and dial back to it with a sharp and precise stop right at your zero mark.
Advanced Fully Multicoated optics effectively reduces reflected light and increases the transmission of light giving you a brighter image than normal single coated lenses
Midas TAC HD
Here at Athlon Optics we have listened to your feedback and suggestions and developed the Midas TAC. Loaded with features including HD Glass, Advanced Fully Multi-Coated lenses to enhance target appearance at all distances, a hard Zero Stop for repeatability and Capped Windage Turret to prevent accidental adjustments. This is not just another option, but the solution!
Key Features
HD Glass
HD Glass gives you better light transmission, brighter, and sharper image.
Advanced Fully Multi-coated
Fully Multi-coated optics effectively reduces reflected light and increases the transmission of light giving you a brighter image than normal single coated lenses
XPL Coating
XPL Coating gives you an extra protection on the exterior lenses from dirt, oil and scratches.
Precision Zero Stop System
Precision Zero Stop System allows you to return to your zero position and dial back to it with a sharp and precise stop right at your zero location.
APRS2 FFP MIL
APRS2 FFP MIL reticle is designed for precision rifle series competition and any other long range shooting applications with accurate ranging capability. It can help you quickly determine distance, holdover positions and windage corrections. The unique design of fine .2 mil hash mark increments from center to 6 mils to both left and right helps the shooter set a quick windage holdover position after he or she dialed in elevation on their targets. The floating 0.05 (0.06)center dot draws a shooter’s vision right on target enabling him or her to engage a target at a blink of an eye.
Subtensions in MIL: A1 (0.04); A2 (0.4); B1 (0.1); B2 (0.18); B3 (0.4); B4 (0.15); C1 (0.2); C2 (0.5); C3 (1); D1 (0.06).
4-16×44 APRS2 MIL 5-25×56 APLR4 MOA 5-25×56 APRS3 MIL 6-24×50 APRS2 MIL 6-24×50 APLR4 MOA 6-24×50 APRS3 MIL
Tube Diameter 30 mm 34 mm 34 mm 30 mm 30 mm 30 mm
Focal Plane First First First First First First
FoV at 100Y 27.7-7 ft 22.1-4.5 ft 22.1-4.5 ft 17.8-4.6 ft 17.8-4.6 ft 17.8-4.6 ft
Eye Relief 3.7″ 3.7″ 3.7″ 3.7″ 3.7″ 3.7″
Turret Style Exposed Elevation & Capped Windage Exposed Elevation & Capped Windage Exposed Elevation & Capped Windage Exposed Elevation & Capped Windage Exposed Elevation & Capped Windage Exposed Elevation & Capped Windage
Length 14.2″ 15.4″ 15.4″ 14.6″ 14.6″ 14.6″
Weight 23.8 oz 30 oz 30 oz 26.3 oz 26.3 oz 26.3 oz
About the Athlon Optics Company
Athlon Optics is a premium manufacturer for weapon scopes, optics, mounting solutions, and other add-ons used for firearms like rifles and long guns. They style and build their scopes and related products by making the most of materials which are durable and long lasting. This includes the Athlon Optics Midas TAC Riflescope 4-16×44 30mm APRS2 FFP MIL Reticle by Athlon Optics. For more shooting items, visit their website.
Rifle Glass Details
Rifle scopes permit you to precisely aim a rifle at various targets by lining up your eye with the target at range. They do this through magnifying the target by employing a series of lenses inside the scope. The scope’s positioning can be dialed in for consideration of numerous ecological elements like wind speed and elevation to account for bullet drop.
The scope’s purpose is to help shooters understand precisely where the bullet will land based upon the sight picture you are viewing via the scope as you line up the scope’s crosshair or reticle with the intended point of impact. Most modern rifle scopes have around 11 parts which are arranged internally and externally on the scope body. These optic pieces include the rifle scope’s body, lenses, adjustment dials, objective focus rings, and other parts. Learn about the eleven parts of rifle scopes.
The Varieties of Rifle Scopes
Rifle scopes can be either “first focal plane” or “second focal plane” kind of scopes. The form of focal plane a scope has decides where the reticle or crosshair lies in connection with the scopes zoom. It literally suggests the reticle is behind or ahead of the magnifying lens of the scope. Picking the best style of rifle optic depends upon what type of shooting or hunting you plan on undertaking.
First Focal Plane Scope Facts
Focal plane scopes (FFP) include the reticle in front of the magnification lens. These styles of scopes are helpful for:
- Quick acquisition, far away kinds of shooting
- Shooting situations where calculations are minimal
- Experienced shooters who know their aim point “hold over” plus “lead” relationships for their firearm
- Shooters who do not mind the reticle is enlarged and uses up more visual eyesight space than a SFP reticle
Second Focal Plane Glass Details
Second focal plane optics (SFP) feature the reticle to the rear of the zoom lens. In the FFP example with the SFP scope, the 5x “zoom” 100 yard tick reticle measurement would be 1/5th of the non “zoom” tick reticle measurement.
- Long distance forms of shooting where shooters have additional time to make ballistic computations
- Shooting where most shots happen within much shorter ranges and distances
- Shooters who select a clearer optic sight picture with less space taken up by the larger size FFP reticle
Magnification for Optics
The measure of scope zoom you need on your scope depends upon the style of shooting you desire to do. Nearly every style of rifle optic supplies some amount of magnification. The amount of zoom a scope delivers is determined by the diameter, density, and curvatures of the lens glass inside of the rifle optic. The zoom of the optic is the “power” of the opic. This implies what the shooter is checking out through the scope is amplified times the power aspect of what can usually be seen by human eyes.
About Fixed Single Power Lens Scopes
A single power rifle optic will have a zoom number designator like 4×32. This means the magnification power of the scope is 4x power while the objective lens is 32mm. The zoom of this kind of scope can not fluctuate given that it is a fixed power scope.
Info About Adjustable Power Lens Rifle Scopes
Variable power rifle scopes use enhanced power. The power change is handled by using the power ring part of the scope near the back of the scope by the eye bell.
The Power and Range of Rifle Optics
Here are some suggested scope power settings and the distances where they may be efficiently used. High power glass will not be as beneficial as lower magnification optics considering too much zoom can be a negative aspect depending on your shooting distance. The very same idea applies to longer ranges where the shooter needs to have sufficient power to see precisely where to best aim the rifle.
Optic Lens Covering
All modern rifle scope and optic lenses are covered. Lens finishing is a crucial aspect of a rifle system when considering high end rifle optics and scope systems.
HD Versus ED Lenses
Some rifle glass producers even use “HD” or high-def lense coverings which make the most of different procedures, polarizations, elements, and chemicals to draw out numerous color ranges and viewable target visibility through lenses. This high-definition finishing is normally used with higher density glass which drops light’s chance to refract through the lens glass. Some scope manufacturers use “HD” to describe “ED” implying extra-low dispersion glass. ED deals with how certain colors are presented on the chromatic spectrum and the chromatic aberration or difference which is also called color distortion or fringing. Chromatic aberration may be noticeable over things with hard outlines as light hits the item from various angles.
Single Coating Versus Multi-Coating for Rifle Scopes
Various optic lenses can even have different coverings applied to them. All lenses typically have at least some kind of treatment or finishing applied to them prior to being used in a rifle scope or optic assembly. Because the lens isn’t simply a raw piece of glass, they require performance enhancing coatings. It is part of the carefully tuned optic. It requires a coating to be applied to it so that the lens will be efficiently usable in numerous kinds of environments, degrees of light (full light VS shade), and other shooting conditions.
This lens treatment can safeguard the lens from scratches while reducing glare and other less beneficial things experienced in the shooting environment while sighting in with the scope. The quality of a single coated lens depends on the scope maker and how much you paid for it.
Some scope makers similarly make it a point to specify if their optic lenses are coated or “multi” covered. Being “much better” depends on the maker’s lens treatment technology and the quality of materials used in building the rifle scope.
Anti-water Lens Coatings
Water on a lens doesn’t help with preserving a clear sight picture through a scope at all. Lots of top of the line and military grade optic makers will coat their lenses with a hydrophobic or hydrophilic finishing.
Scope Mounting Choices
Mounting options for scopes are available in a few options. There are the standard scope rings which are individually installed to the optic and one-piece scope mounts which cradle the scope. These various types of mounts also normally are made in quick release variations which use manual levers which enable rifle shooters to rapidly install and dismount the scope.
Rifle Glass Mounts with Hex Key Rings
Standard, clamp style mounting scope rings use hex head screws to mount to the flattop style Picatinny scope mount rails on rifles. These types of scope mounts use a couple of separate rings to support the optic, and are often made from 7075 T6 billet aluminum which is designed for long range accuracy shooting. This type of scope mount is fine for rifles which need a long lasting, rock solid mount which will not move no matter how much the scope is moved or abused.
Quick-Release Cantilever Scope Ring Mounting Solutions
These kinds of quick-release rifle scope mounts can be used to rapidly remove a scope from a rifle and reattach it to a different rifle. A wide range of scopes can also be switched out if they all use a similar style mount. The quick detach mount style is CNC crafted from anodized 6061 T6 aluminum and the mounting levers fasten firmly to a flat top design Picatinny rail. This enables the scope to be sighted in while on the rifle, taken off of the rifle, and remounted while keeping accuracy. These kinds of mounts are useful and beneficial for rifles which are hauled around a lot, to take off the optic from the rifle for protection, or for optics which are chosen for use between multiple rifles. An example of this mount type is the 30mm mount from the Vortex Optics brand. It generally costs around $250 USD
Optic Tube Sealing and Gas Purging
Wetness inside your rifle optic can mess up a day of shooting and your highly-priced optic by causing fogging and producing residue inside of the scope tube. A lot of scopes protect against moisture from entering the scope tube with a system of sealing O-rings which are waterproof. Normally, these water-resistant optics can be submerged under 20 or 30 feet of water before the water pressure can push moisture past the O-rings. This should be sufficient wetness prevention for conventional use rifles for hunting and sporting purposes, unless you anticipate taking your rifle aboard a watercraft and are concerned about the optic still performing if it falls overboard and you can still rescue the gun.
Rifle Glass Gas Purging
Another element of preventing the accumulation of wetness within the rifle optic’s tube is filling the tube with a gas like nitrogen. Because this area is currently taken up by the gas, the glass is less affected by condition alterations and pressure differences from the outdoor environment which may possibly permit water vapor to leak in around the seals to fill the vacuum which would otherwise exist. These are good qualities of a decent rifle scope to seek out.
