Description
Rifle Scope Level Product Details
BKL 12-Way Scope Bubble Level, Fits 1 Dia. Scope Tube
12-way scope bubble level Fits 1 dia. scope tube Easy installation This 12-way folding scope level by BKL is easy to install and eliminates cant. Position the level above, below or off to the side depending on your needs. By eliminating cant, your accuracy will improve. Included ring fits any 1 scope tube.
Rifle Scope Level Product Features
SCOPE MOUNTS
About the Bkl Technologies Brand
Bkl Technologies is a premium manufacturer for long gun scopes, optics, mounting solutions, and other accessories used for guns like rifles and long guns. They style and supply their scopes and related products using building materials which are long lasting and durable. This includes the BKL 12-Way Scope Bubble Level, Fits 1 Dia. Scope Tube by Bkl Technologies. For additional shooting products, visit their site.
Information About Rifle Scopes
Rifle scopes enable you to specifically aim a rifle at different targets by aligning your eye with the target over a range. They do this through magnifying the target by utilizing a series of lenses inside the scope. The scope’s positioning can be adjusted to account for separate environmental elements like wind speed and elevation decreases to make up for bullet drop.
The scope’s function is to understand exactly where the bullet will hit based upon the sight picture you are seeing with the optic as you line up the scope’s crosshair or reticle with the intended point of impact. Many contemporary rifle optics have about 11 parts which are found internally and externally on the scope body. These parts consist of the rifle scope’s body, lenses, modification turrets or dials, focus rings, and other components. Learn about the eleven parts of rifle optics.
Rifle Glass Styles
Rifle scopes can be either “first focal plane” or “second focal plane” type of scopes. Deciding upon the optimal type of rifle optic depends on what type of shooting you plan on doing.
First Focal Plane Glass
Focal plane scopes (FFP) feature the reticle in front of the magnification lens. This causes the reticle to increase in size based on the level of magnification being used. The benefit is that the reticle measurements are the same at the amplified range as they are at the non amplified distance. One tick on a mil-dot reticle at 100 yards without “zoom” is still the same tick at one hundred yards with 5x “zoom”. These types of scopes are valuable for:
- Quick acquisition, long distance kinds of shooting
- Shooting situations where estimations are marginal
- Experienced shooters who understand their aim point “hold over” and “lead” ratios for their weapon
- Shooters who do not mind the reticle is bigger and occupies more visual sight area than a SFP reticle
About Second Focal Plane Glass
Second focal plane glass (SFP) come with the reticle to the rear of the zoom lens. This causes the reticle to stay at the very same overall size in relation to the quantity of magnification being used. The outcome is that the reticle measurements alter based upon the magnification chosen to shoot over longer distances given that the reticle measurements represent different increments which vary with the zoom. In the FFP illustration with the SFP glass, the 5x “zoom” one hundred yard tick would be 1/5th of the non “zoom” tick measurement. These particular sorts of glass are beneficial for:
- Long distance kinds of shooting where shooters have extra time to make ballistic computations
- Shooting where most shots take place within much shorter ranges and distances
- Shooters who desire a clearer optic sight picture without space taken up by the larger sized FFP reticle
About Rifle Optic Zoom
The quantity of magnification a scope provides is determined by the size, thickness, and curvatures of the lenses inside of the rifle scope. The zoom of the scope is the “power” of the scope.
Fixed Single Power Lens Rifle Glass Info
A single power rifle optic will have a magnification number designator like 4×32. This implies the zoom power of the scope is 4x power while the objective lens is 32mm. The zoom of this type of scope can not change given that it is a fixed power scope.
Variable Power Lens Rifle Scope Info
Variable power rifle scopes have adjustable power. These types of scopes will note the magnification degree in a configuration like 2-10×32. These numbers imply the magnification of the scope could be adjusted in between 2x and 10x power. This always involves the powers in-between 2 and 10. The power manipulation is accomplished utilizing the power ring part of the scope near the back of the scope by the eye bell piece.
Power Levels and Range
Here are some recommended scope power settings and the ranges where they could be effectively used. Remember that high magnification optics will not be as efficient as lower magnification level optics and scopes due to the fact that increased magnification can be a detractor. The same concept goes for longer ranges where the shooter needs sufficient power to see exactly where to properly aim the rifle at the target.
Details on Rifle Optic Lens Coverings
All modern rifle optic and scope lenses are coated. There are various types and qualities of lens finishings. When considering luxury rifle targeting systems, Lens finish can be a critical component of defining the capability of the rifle. The lenses are among the most significant pieces of the optic since they are what your eye sees through while sighting a rifle in on the target. The coating on the lenses offers protection to the lens surface and even helps with anti glare capabilities from refracted sunshine and color presence.
HD Versus ED Lens Coatings
Some scope producers also use “HD” or high-definition lens coatings which use different techniques, components, polarizations, and chemicals to draw out a wide range of colors and viewable quality through the lens. Some scope makers use “HD” to refer to “ED” meaning extra-low dispersion glass.
Single Finishing Versus Multi-Coating
Different scope lenses can even have various finishes applied to them. All lenses generally have at least some kind of treatment or covering applied to them prior to being used in a rifle scope or optic assembly. Since the lens isn’t just a raw piece of glass, they require performance enhancing coatings. It is part of the finely tuned optic. It requires a coating to be applied to it so that it will be optimally functional in numerous kinds of environments, degrees of sunlight (full light VS shade), and other shooting conditions.
Single covered lenses have a treatment applied to them which is usually a protective and enhancing multi-purpose treatment. This lens treatment can shield the lens from scratches while decreasing glare and other less advantageous things experienced in the shooting environment while sighting in with the optic. The quality of a single covered lens depends on the scope designer and the amount you spent on it. The scope’s maker and cost are indications of the lens quality.
Some scope manufacturers similarly make it a point to specify if their optic lenses are layered or “multi” covered. Being “much better” depends on the maker’s lens treatment technology and the quality of products used in building the rifle scope.
Anti-water Covering for Rifle Scopes
Water on a lens doesn’t help with keeping a clear sight picture through a scope at all. Lots of top of the line and military grade scope companies will coat their lenses with a hydrophilic or hydrophobic finish.
Rifle Optic Mounting Alternatives
Installing options for scopes are available in a few choices. There are the standard scope rings which are individually installed to the optic and one-piece scope mounts which cradle the scope. These various types of mounts also usually can be found in quick release versions which use manual levers which enable rifle operators to rapidly mount and dismount the glass.
Hex Key Rifle Glass Rings
Standard, clamp design mounting scope rings use hex head screws to install to the flattop style Picatinny scope mount rails on the tops of rifles. These kinds of scope mounts use two separate rings to support the optic, and are made from 7075 T6 billet aluminum or similar materials which are manufactured for long distance accuracy shooting. This form of scope mount is good for rifles which require a resilient, hard use mount which will not change no matter how much the scope is moved or jarring the rifle takes. These are the type of mounts you really want to have for a faithful scope setup on a far away hunting or competitors rifle which will hardly ever need to be changed or adjusted. Blue 242 Loctite threadlocker can additionally be used on the mount screws to protect against the hex screws from wiggling out after they are mounted tightly in position. An example of these mounting rings are the 30mm style made by Vortex Optics. The set usually costs around $200 USD
Rifle Scope Mounts with Quick-Release Cantilever Rings
These kinds of quick-release rifle scope mounts can be used to rapidly detach a scope from a rifle and reattach it to a different rifle. Several scopes can also be switched out if they all use a similar designed mount. The quick detach design is CNC machined from anodized 6061 T6 aluminum and the mounting levers connect tightly to a flat top design Picatinny rail. This allows the scope to be sighted in while on the rifle, taken off of the rifle, and remounted while preserving accuracy. These kinds of mounts are useful and beneficial for shooting platforms which are transferred between vehicles a lot, to take off the scope glass from the rifle for protection, or for sight systems which are used between several rifles. An example of this mount type is the 30mm mount from Vortex Optics. It generally costs around $250 USD
What to Know About Glass Tube Sealing and Gas Purging
Wetness inside your rifle scope can mess up a day of shooting and your pricey optic by bringing about fogging and producing residue inside of the scope tube. The majority of scopes avoid moisture from getting in the scope tube with a system of sealing O-rings which are waterproof.
Gas Purged Rifle Optic Tubes
Another part of avoiding the accumulation of wetness within the rifle scope’s tube is filling the tube with a gas like nitrogen. Considering that this space is currently taken up by the gas, the optic is less influenced by temp shifts and pressure variations from the external environment which might potentially enable water vapor to permeate in around the seals to fill the void which would otherwise be there. These are good qualities of a good rifle scope to look for.
