Description
Last update on February 7, 2023 // Source: Amazon API
Airsoft Tactical Vest Product Details
Valken Tactical Crossdraw Vest – Youth – Olive
Adjustable side straps
Airsoft Tactical Vest Product Features
100% Polyester
Imported
2 built in rifle magazine pouches , double stackable
Double pistol magazine pouch
Removable Cross draw pistol holster
Duty belt with built in pistol mag pouches
About Tactical Vests
The Valken Tactical Crossdraw Vest – Youth – Olive by Valken works well for airsoft. Airsoft vests, plate carriers, and tactical loadout equipment are often used for holding equipment on the airsoft field. These carriers and vests make it simple for team players to keep control of their gear and efficiently run around the combat zone while having the right gear they need to have to win more objectives. They also have a tacticool operator status look to them and give protection to participant’s bodies from incoming airsoft BBs.
Airsoft tactical vests typically have numerous pockets, pouches, and MOLLE attachment panels. Some frequently identified items in a standard airsoft tactical vest loadout include the following: Extra airsoft weapon mags, sidearms like pistols or shotguns, additional airsoft BBs, red rags, powerbars, water , radios, gun service kits, and multitools and knives.
Valken Vest Protection Levels
Tactical airsoft vests like the Valken Tactical Crossdraw Vest – Youth – Olive supply a few layers of extra fabric to aid in cushioning the force of inbound airsoft BBs. Some vests have more than others and some vests include tough armor plates or ABS plastic scales. These airsoft vests have extra cushioning and shielding, however practically every vest will provide some defense from inbound airsoft BBs.
One obstacle faced by playing with thick vests with rows of magazine pouches and a lot of equipment affixed to them is that players can not feel their hits effectively. In these cases, game players should listen for their hits and call themselves out if their vest or equipment is struck by inbound airsoft BBs. Players should follow the airsoft field or match guidelines.
Kinds of Valken Airsoft Vests
There are a number of different types of vests and load-bearing equipment worn in airsoft. As a definition, an airsoft vest is a basic term used to identify anything game players tactically wear on the upper half of their bodies and holds airsoft equipment.
The airsoft vest types include pre-made tactical airsoft vests, tactical MOLLE vest platforms, airsoft plate carriers and armor holders, modular chest rigs and tactical half vests, and tactical load-bearing vests (LBV). The Valken Valken Tactical Crossdraw Vest – Youth – Olive falls into one of these categories. Learn about the types below.
Pre-Made Tactical Airsoft Vests
Pre-made airsoft vests are one of the most standard forms of airsoft vests. These vests come ready-to-play out of the box and are also some of the more affordable vests offered while still maintaining excellent quality and resilience.
These vests are instantly functional and come with sewn in magazine pouches, pouches which hold airsoft BBs, and other pockets. With pre-made vests, game players can typically attach a U.S. GI military web belt to the bottom of the vest.
Toughness of Pre-Made Vests
Considering that these airsoft vests are factory constructed, they are well made with durable stitching and will normally last for a long period of time. We’ve seen a few of these vests used for so long the colors start to fade, but they still serve their equipment carrying purpose. Lots of airsoft participants start out with a version of these vests, resell it later, and upgrade to a more customized vest solution.
Pre-Made Vest Models and Types
Make sure the vest you are purchasing will work for holding your specific airsoft gun type magazines. Various styles of pre-made airsoft vests are also readily available. Rifle shotgun tactical vest pouch setups with shotgun shell loops inside pouches.
Airsoft MOLLE Tactical Vests
A more innovative and adjustable airsoft vest is the tactical MOLLE airsoft vest style. These modular vests enable each pouch to be transferred and positioned separately based upon the desired setup airsoft participants and tactical operators require. The MOLLE webbing uses a hook and loop strap system which enables gun magazine pouches, radio pouches, medical IAK pouches, communications pouches, and weapon holsters to be installed anywhere on the vest where the MOLLE panels are located. The resulting hundreds of different mixes, positions, and orientations mean tactical operators to decide on the customized MOLLE pouch set up for the particular role they are playing (like breacher, grenadier, SAW gunner, etc) or mission they are running.
The tailored style and feel of MOLLE airsoft vests are exceptional. The tactical vest platform and pouches are normally sold individually or in sets which makes them more pricey than pre-made airsoft vests.
Airsoft Versus Military MOLLE Equipment
When looking for MOLLE vests, remember airsoft companies make replicas of real world tactical vests. These airsoft knock-off pouches and vests run a fraction of the prices of the real equipment used by armed forces, Special Forces (like Rangers, Naval Special Warfare Development ‘Dev Group’, and MARSOC) and other special ops teams.
How MOLLE Accessories Work
The MOLLE system is an acronym that means Modular Lightweight Load-Carrying Equipment. This tactical equipment system explains pouches, panels, and straps which use MOLLE mounts. The tri-factor parts of the system are MOLLE pouches, straps, and panels which are put together to develop the MOLLE airsoft loadout. MOLLE panels are the base located on airsoft vests. They feature a series of loops that are employed to hold pouches to the best with straps. The MOLLE straps are usually made of nylon with a snap and are threaded through the MOLLE panel loops and the similarly designed loops on pouches. The MOLLE pouches have a MOLLE loop panel on the back of the pouch which permits straps to be firmly connected to MOLLE panel loops.
Putting Your Kit Together
The entire MOLLE system comes together as operators select the pouches they need for an airsoft vest loadout or tournament, weave the MOLLE straps through the loops on the pouches and vest panels, and fasten the snaps on the straps to keep the pouches in place. The result is a super tailored airsoft vest with the look of operator status.
Airsoft Tactical Vest Plate Carriers
Airsoft tactical vest plate carriers resemble basic MOLLE vests and lots of these vests also have plate carrier compartments and features. This makes it easy to use and switch MOLLE pouches in between vest plate carriers and standard MOLLE vests These tactical vests have internal pouches to hold genuine or replica ballistic level III3A plates or rifle plates. Airsoft game players employ these plate carrier vests for an added coolness element and can even run genuine or imitation ballistic plates and panels to simulate an operational loadout or battle kit.
Airsoft Modular Chest Rigs and Slicks
Tactical modular chest rig vests typically just have front and back panels that can hold level IIIA plates. They look like plate carrier vests and similarly have MOLLE panels on the front and back for MOLLE pouches. These tactical vests are varied from MOLLE vests due to the fact that they are more low-profile and can be worn over or under other clothes like jackets, uniforms, vests, and bulky clothing reasonably easily. The side straps on modular chest rigs also readjust more than basic plate carrier vests. Slicks are basically modular chest rig vests however without the MOLLE accessories which makes them smooth or slick. These kinds of airsoft vests are less handy for carrying equipment given that they do not have pouches. They are often chosen for props as civilian role game players or tactical kit builds for a certain time modeled after a significant military unit that employed them like the Navy Seals.
Tactical Half Vests and Gunfighter Harnesses
Airsoft half vests or gunfighter vests fall into this vest class. Half vests are half of a vest with a row of internal pouches in the front. This type of airsoft vest can even be worn over top of other types of gear and vests.
Tactical Load-Bearing Vests (LBVs)
Tactical load-bearing vests are a few of the most conventional vests to employ for airsoft. These vest designs were employed throughout wars like Vietnam and Desert Storm. They hold a location in military history and now are used on loads of airsoft battlegrounds. These airsoft tactical vests include 6 integrated M4 magazine pouches with 2 grenade pouches. If required, they have loops to hook up a U.S. G.I. web belt where airsoft team players can include more pouches and ammo dump bags. The back of the vest has connections for a buttpack. The vest straps for the sides and shoulders adapt to littler and larger-sized airsoft game players that make this vest really versatile.
Frequently Asked Questions (FAQs)
Question: Does the Valken make good tactical vests?
Answer: Yes, Valken is known to make nice tactical vests, chest rigs, and MOLLE vests with high quality products.
Question: How many airsoft weapon mags does the vest hold?
Answer: Usually around 4 to 6 depending upon if they are M4 or AK47 style mags. Look at the vest item specifications for storage capacity information.
Question: Does the Valken Tactical Crossdraw Vest – Youth – Olive make a great tactical vest?
Answer: Yes, the Valken Tactical Crossdraw Vest – Youth – Olive can be a great tactical vest to wear for training, MilSim, and airsoft. Set up the vest around your airsoft gear kit.
Question: What kind of elements are tactical vests made out of?
Answer: Tactical vests like this Valken vest are usually made of several kinds of products including CORDURA, webbing, nylon, rubber, and other similar fabric materials. The straps and closures are generally secured with velcro, metal snaps, or plastic buckles.
Question: Can the vest pockets and pouches hold airsoft BBs?
Answer: Yes, you can carry airsoft BBs in the vest pockets. With some particular vest models, you may want to attach additional pouches.
