Description
Airsoft Tactical Vest Product Details
Mil-Tec 6 Pocket Chest Rig
Mil-Tec by Sturm: “Mil-Tec is our brand of Tactical and Outdoor Products. The Mil-Tec brand was started in the 90’s and has evolved into special needs for the police, tactical, and outdoor industry.”
Airsoft Tactical Vest Product Features
Adjustable Length and Width
Padded Shoulder Straps
Three Accessory Pouches
Two Utility Pouches
Large Map Pouch with Snap Closure
About Tactical Vests
The Mil-Tec 6 Pocket Chest Rig by Mil-Tec works well for airsoft. Airsoft vests, plate carriers, and tactical loadout equipment are often used for holding gear on the airsoft field. These carriers and vests make it simple for participants to keep control of their gear and easily move around the combat zone while having the right gear they require to win more missions. They also have a tacticool operator status appeal to them and give protection to game player’s bodies from inbound airsoft BBs.
Airsoft tactical vests typically have lots of pockets, pouches, and MOLLE attachment panels. This is a balancing act since it is a mix of packing what you require in the field but not too much. Prevent yourself from carrying so much gear that it weighs you down or prevents you from walking efficiently through the airsoft field. Some frequently picked things in a standard airsoft tactical vest loadout include the following: Spare airsoft weapon mags, sidearms like pistols or shotguns, additional airsoft BBs, red rags, food, water , radios, weapon service kits, and knives and multitools.
Mil-Tec Vest Protection Levels
Tactical airsoft vests like the Mil-Tec 6 Pocket Chest Rig supply a couple of layers of extra fabric to help cushion the effect of inbound airsoft BBs. Some vests have more than others and some vests feature hardened armor plates or ABS plastic scales. These airsoft vests have extra padding and protection, but almost every vest will use some shielding from incoming airsoft BBs.
One challenge faced by donning thick vests with rows of magazine pouches and a lot of gear attached to them is that team players can not feel their hits well. In these cases, team players should listen for their hits and call themselves out if their vest or equipment is hit by inbound airsoft BBs. Game players need to follow the airsoft field or match guidelines.
Kinds of Mil-Tec Airsoft Vests
There are a few distinct types of vests and load-bearing equipment worn in airsoft. As a definition, an airsoft vest is a general term used to describe anything participants tactically don on the upper half of their bodies and holds airsoft gear.
The airsoft vest types consist of pre-made tactical airsoft vests, tactical MOLLE vest platforms, airsoft plate carriers and armor holders, modular chest rigs and tactical half vests, and tactical load-bearing vests (LBV). The Mil-Tec Mil-Tec 6 Pocket Chest Rig falls into one of these categories. Learn about the types below.
Pre-Made Tactical Airsoft Vests
Pre-made airsoft vests are one of one of the most basic forms of airsoft vests. These vests come ready-to-play out of the box and are also some of the cheaper vests readily available while still maintaining great quality and durability.
These vests are immediately functional and include sewn in magazine pouches, pouches which hold airsoft BBs, and other pockets. The magazine pouches are unique to the vest models and typically are available in M4 or AK47 styles. With pre-made vests, players can typically attach a U.S. GI military web belt to the bottom of the vest. Here they can include things like dump pouches, drop leg holsters, and other belt pouches and accessories. The airsoft vest back has MOLLE loop accessories for a CamelBak or other things like glow sticks or a shotgun scabbard.
Toughness of Pre-Made Vests
Considering that these airsoft vests are factory built, they are well made with durable stitching and will typically last for a very long time. We have seen a few of these vests used for so long the colors begin to fade, however they still serve their gear carrying purpose. Many beginner airsoft team players start playing with a version of these vests, resell it in the future, and upgrade to a more customized vest choice.
Pre-Made Vest Models and Types
Make sure the vest you are buying will work for holding your particular airsoft weapon type magazines. Different designs of pre-made airsoft vests are also offered. Rifle shotgun tactical vest pouch setups with shotgun shell loops inside pouches.
Airsoft MOLLE Tactical Vests
A more customizable and sophisticated airsoft vest is the tactical MOLLE airsoft vest style. These modular vests enable each pouch to be transferred and positioned independently based on the specific set up airsoft team players and tactical operators need.
The tailored appearance and feel of MOLLE airsoft vests are pretty awesome. Nevertheless, the tactical vest platform and pouches are usually offered individually or in kits that makes them more highly-priced than pre-made airsoft vests. A basic MOLLE vest can be costly with the pouches costs increasing the expense. A fully filled MOLLE tactical loadout can cost hundreds of dollars depending on how many pouches and different kinds of MOLLE pouches are bought. If you have made a decision to go the MOLLE vest route, see if you can pick MOLLE pouch sets to get your loadout set up.
Airsoft Versus Military MOLLE Equipment
When searching for MOLLE vests, bear in mind airsoft companies make replicas of real world tactical vests. These airsoft knock-off vests and pouches run a fraction of the selling prices of the genuine gear used by militaries, Special Forces (like Rangers, Naval Special Warfare Development ‘Dev Group’, and MARSOC) and other unique ops teams.
How MOLLE Attachments Work
The three parts of the system are MOLLE pouches, straps, and panels which are put together to develop the MOLLE airsoft loadout. MOLLE panels are the base seen on airsoft vests. The MOLLE pouches have a MOLLE loop panel on the back of the pouch which make it possible for the straps to be solidly connected to MOLLE panel loops.
Putting Your Kit Together
The whole MOLLE system comes together as operators pick the pouches they require for an airsoft vest loadout or mission, weave the MOLLE straps through the loops on the pouches and vest panels, and affix the snaps on the straps to keep the pouches in place. The result is a super personalized airsoft vest with the look of operator status.
Airsoft Tactical Vest Plate Carriers
Airsoft tactical vest plate carriers resemble standard MOLLE vests and many of these vests also have plate carrier compartments and attributes. This makes it easy to change and employ MOLLE pouches between vest plate carriers and standard MOLLE vests These tactical vests have internal pouches to hold genuine or replica ballistic level III3A plates or level IV plates. Airsoft players employ these plate carrier vests for an included coolness element and can even run legitimate or replica ballistic plates and panels to simulate a practical loadout or battle kit.
Airsoft Modular Chest Rigs and Slicks
They resemble plate carrier vests and similarly have MOLLE panels on the front and back for MOLLE pouches. These tactical vests are different from MOLLE vests since they are more low-profile and can be used over or under other clothes like jackets, uniforms, vests, and large garments relatively quickly. These kinds of airsoft vests are less beneficial for holding equipment because they do not have pouches.
Tactical Half Vests and Gunfighter Harnesses
Airsoft half vests or gunfighter vests fall into this classification. Half vests are half of a tactical vest with a row of internal pouches in the front. They are handy to run and can be worn easily in the course of a gun fight hence the namesake. They typically have capacities for 6 M4 magazines in the front (or similarly sized weapon magazines) with MOLLE or taco pouches in the front for pistol magazines, admin pouches, medical equipment, and other add-on pouches. The harness is held in position by a pair of shoulder straps and the back of the vest is open. This type of airsoft vest can also be used over top of other kinds of gear and vests.
Tactical Load-Bearing Vests (LBVs)
Tactical load-bearing vests are a few of the most standard vests to employ for airsoft. These airsoft tactical vests feature 6 integrated M4 mag pouches with 2 grenade pouches. The vest straps for the shoulders and sides adapt to big and little-sized airsoft team players which make this vest truly versatile.
Frequently Asked Questions (FAQs)
Question: Does the Mil-Tec make good tactical vests?
Answer: Yes, Mil-Tec is known to make nice tactical vests, chest rigs, and MOLLE vests with high quality products.
Question: How many airsoft gun magazines does the vest hold?
Answer: Generally around 4 to 6 depending on if they are M4 or AK47 style mags. Check out the vest product details for capacity information.
Question: Does the Mil-Tec 6 Pocket Chest Rig make a great tactical vest?
Answer: Yes, the Mil-Tec 6 Pocket Chest Rig can be a good tactical vest to wear for training, MilSim, and airsoft. Set up the vest around your battlefield gear loadout.
Question: What type of materials are tactical vests made out of?
Answer: Tactical vests like this Mil-Tec vest are usually made of a number of types of material including CORDURA, webbing, nylon, rubber, and other similar fabric products. The straps and closures are usually fastened with velcro, metal snaps, or plastic buckles.
Question: Can the vest pockets and pouches hold airsoft BBs?
Answer: Yes, you can hold airsoft BBs in the vest pockets. With some particular vest designs, you might want to add extra pouches.
